3M™ Double Coated Polyethylene Foam Tape 4492 Black is a closed-cell, polyethylene foam carrier. It is formulated for more demanding indoor and outdoor mounting and bonding applications. A noted feature of Foam Tape 4492 Black is its ability to conform and bond to irregular surfaces. It offers good temperature resistance and long term durability.
- 0.031 in. (0.8 mm) closed-cell polyethylene foam carrier
- High ultimate adhesion to a wide variety of surfaces
- Conformable tape bonds to irregular surfaces
- Unique acrylic adhesive system provides long term durability
- Good initial and long-term temperature resistance
- This product is black
|Width||18 in||457.2 mm|
|Length||72 yd||65.83 m|
What is the 3M™ Double Coated Polyethylene Foam Tape 4492B used for?
The 3M™ Double Coated Polyethylene Foam Tape 4492B can be used for bonding, attaching, and mounting materials such as glass and plastics.
Is the tape suitable for outdoor use?
Yes, this tape is designed to perform well both indoors and outdoors.
How do I apply the tape properly?
First, make sure that the application surface is clean and dry. Then, simply peel off the protective liner from one side of the foam tape, press it onto the material you wish to bind or attach to another surface. Afterwards peel off its backing paper so that’s ready to adhere on a substrate of your choice.
What are some benefits of using this double-coated foam tape compared with other adhesive tapes or traditional bonding techniques?
This product allows an easy solution where screwing/bolting isn't reasonable as its binding capability creates almost immediate load-bearing bonds between different kind of materials without any risk tarnishing its appearance on being applied inside glass parts & sensitive surfaces etc. Additionally due to high initial tack no clamp time required!
Speed up the mounting process and achieve a more aesthetically pleasing installation with 3M™ Double Coated Polyethylene Foam Tape 4492. This 1/32 in. thick polyethylene foam tape is known for its high ultimate adhesion and reliable performance across many surfaces. One of its noted features is its ability to conform to irregular substrates. It provides high ultimate adhesion to many plastics and is formulated for demanding indoor and outdoor general purpose mounting and bonding applications. Common uses include automotive mirror bonding, decorative trim, nameplates and other general purpose mounting applications.Recommended Application
- Indoor general purpose mounting and joining
- Automotive mirror bonding
- Decorative trim
- Nameplate mounting
- Point-of-purchase displays and signs
3M double coated tapes offer speed, strength and improved aesthetics to your mounting application. Instead of mechanical fasteners such as screws, bolts and studs, double coated tapes leave no puncture holes. Our tapes can be easily applied by hand or with a dispenser, with no special application equipment required for a firm bond.What is Double Coated Tape?
In general, double coated tape is composed of a foam, paper, film, or tissue carrier that is coated on both sides with pressure sensitive adhesive. The adhesive is protected by a peel-away liner that can be removed at the time of application or left in place until the joining surfaces are ready to be attached. Applications for double coated tape are found in construction, fabrication, arts, and hobby. For bonding rough or irregular surfaces, 3M™ Double Coated Foam Tapes fill gaps and distribute stress uniformly over the bonded area.