through rough waters
Scotch-Brite™ Surface Conditioning Scrim Backed Belt, SC-BS, A/O Medium, 4 in x 90 in, 10 ea/Case
$81.75 / Each
| SKU | 7010309610 |
|---|---|
| Legacy SKU | 61500027133 |
| UPC | 00048011054070 |
| Product Number | SC-BS |
Scotch-Brite Surface Conditioning Belt is a durable belt engineered to perform detail work such as blending, blending corners, cleaning, contour finishing, deburring, deburring edges, fine finishing, flat finishing, setting the grain, stainless steel finishing, and attaining straightline-brushed finishes on a variety of metals.
- Nonwoven, surface conditioning belts clean, blend, deburr and finish
- Reduced loading and heat build-up allow extended operating time and consistent surface conditioning results
- Conformability allows abrasive to stay in contact with complex-shaped parts in robotic processing
- Reinforced backing and nonwoven open web material provide superior flexibility for detail work, over contours and edges
- Removes surface imperfections, grind lines, mill, and other marks
Product Dimensions |
Imperial | Metric |
| Weight | 0 NULL | |
|---|---|---|
| Width | 0 null | |
| Length | 0 null | |
| Height | 0 null |
Shipping Dimensions |
|
| Weight | 11.87189 lb |
|---|---|
| Length | 20.8 in |
| Width | 4.6 in |
| Height | 20.6 in |
| Color | Maroon |
|---|
PRODUCT FAQ
-
What is the size of 3M's Scotch-Brite™ Surface Conditioning Belt, SC-BS, A/O Medium, 4 in x 90 in?
The size of our Surface Conditioning Belt is 4 inches wide by 90 inches long.
-
How many pieces come in a single case?
Each case comes with ten belts included.
-
Can it be used on any surface or just metal?
Our Surface Conditioning Belt can be used on various surfaces such as metals, plastics and composites.
-
What does AO-Medium refer to regarding this product?
AO refers to Aluminum Oxide mineral which is the type of abrasive that's used for the belt. Medium denotes its grade and means it’s a blend between coarse and fine variants commonly found in grinding products around P100-P150 grit equivalent according to FEPA standards.
-
Is there an recommendation on how fast the belt should run at work ?
The suggested operating speed range of our product ranges from working surface speeds approximately ranging from starting points around min2500 SFPM all .the way up depending upon what surfaces are being worked upon
Scotch-Brite™ Surface Conditioning Belt is a versatile abrasive that is effective in removing coarse grind lines, mill marks, or small burrs left by cutting tools or conventional abrasives. These abrasive belts come in various widths and lengths and are suitable for different belt sanding tools for both wood and metal applications.
Ideal for Robotic FinishingScotch-Brite™ Surface Conditioning Belts are highly conformable and consistent, making them an excellent option for robotic metal finishing. They can produce a spec-required, aesthetic finish when used in both manual and robotic processing.
Choose the Right Belt for You3M offers a wide selection of belts that can fit most industrial belt sanders. Wide belt sanders are ideal for sanding and finishing large wood panels. Medium-width belts are suitable for edge or portable belt sanders for sanding or blending wood pieces such as cabinet doors. Narrow belts are used with file tools in metalworking to access small areas or inside corners.
Hard-Working Minerals: Aluminum Oxide and Silicon CarbideScotch-Brite™ Surface Conditioning Belts are manufactured with a choice of silicon carbide or aluminum oxide abrasive mineral. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish.
An Alternative for Wheels and DiscsBelt sanders are used for rapid grinding, sanding, and finishing on various surfaces. Sanding wheels and discs may clog quickly, making them less efficient, depending on the material being worked. Belt sanders continue to sand without clogging because small grooves in the abrasive belt open as they go around the arc of the drive wheel.
