Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
Welcome Guest

Clear All Filters  

Standard Abrasives™ Buff and Blend HP Disc, 852308, 3 in x 1/8 in A VFN, 25/Carton, 250 ea/Case

Standard Abrasives™

$1.69 / Each

SKU 7010310112
Legacy SKU 66000035288
UPC 00051115359286
Product Number 852308

Made of non-woven material with added stiffness, the Standard Abrasives Buff and Blend HP Disc produces an aggressive cut and is designed for applications such as removal of burrs or tough contaminants.

  • Tough HP material is stiffer and more tear-resistant than GP material and is well-suited for edge deburring and metal removal
  • Aluminum Oxide cuts sharp, helps produce a consistent scratch pattern, and works well on ferrous and non-ferrous metals
  • Pliable open web removes burrs and surface contaminants without gouging the substrate
  • Open web is load resistant, limiting buildup of debris that can clog the abrasive center hole discs come in a range of medium to large sizes to meet many different project specifications
  • Red discs contain aluminum oxide, very fine (VFN) grade abrasive
  Add to cart
On it's way to you October 11  

Qty

Minimum Order 250 Items
Order Increment 250 Items
  Multi-Functional
  Versatile Across Industries
  Easy To Use
  Fantastic Price
Product Dimensions
 Imperial Metric
Weight 0 NULL
Width 0 null
Length 0 null
Height 0 null
Diameter 3 in 76.2 mm
Center Hole Diameter 0.12 in 3.048 mm
Shipping Dimensions
Weight 6.29861 lb
Length 23.6878 in
Width 9.75 in
Height 7.9378 in
Color Red
Thread Size Non Pertinent

PRODUCT FAQ

  1. What is the size of 3M's Standard Abrasives™ Buff and Blend HP Disc, 852308?

    The disc is measured at 3 inches in diameter along with the thickness of about 1/8 inch.

  2. How many units are included in one inner pack and outer case of the product?

    One inner pack contains a total of 25 discs while an outer case has a total of 250 discs.

  3. What does VFN mean on these Buff and Blend HP Discs?

    VFN stands for "very fine" abrasive grade which refers to its grit size or coarseness level (between medium and ultra-fine grades).

  4. Can you tell me more about this specific type or model of buffing disc - what makes it different from other brands or types?

    The Standard Abrasives™ Buff and Blend HP Disc uses high-performance nylon fibers instead of traditional steel wool to create less shedding debris while offering consistent finish quality on aluminum, stainless steel, etc. Its open-web construction reduces loading after use so that it can be used repeatedly before disposal.

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
Added Stiffness for Lightweight Deburring and other Moderate Applications

The Standard Abrasives™ Buff and Blend HP Disc efficiently performs light deburring and aggressive cleaning on a variety of metal substrates: ferrous and non-ferrous metals, aluminum, high nickel and stainless steel. The tough nylon web offers sustained performance and leaves a consistent finish on the workpiece, resulting in little to no rework. The very fine (VFN) grade abrasive contributes to a nice clean finish. This disc features aluminum oxide mineral, which cuts sharp and is friable, fragmenting under heat and pressure to reveal sharp cutting edges during use. Among the four Standard Abrasives™ Buff and Blend materials, HP material is moderately stiff, durable and aggressive, making it a good starting point for deburring applications. Its non-woven construction responds to contours and extrusions while minimizing gouging or marring of the part. If desired, discs may be ganged on a shaft to form a wheel.

Durable Disc Accommodates Edges and Extrusions

The HP Disc is a smart choice when you need to remove part lines from small castings, small burrs from threaded pipes, burrs from aluminum extrusions or die cast flashing, or heavy surface oxidation. Its durability results in a long service life, helping to reduce the need for replacements. Moreover, the sturdy material stands up to edges and extrusions, minimizing edge fraying and grain shedding. If greater durability is desired for heavier-duty applications such as edge deburring, you may upgrade to one of our Standard Abrasives™ Buff and Blend High Strength (HS) Discs. Quick Change discs are available separately.

The Many Benefits of Standard Abrasives™ Non-Woven Products

Standard Abrasives™ Buff and Blend non-woven products offer many benefits. Varying Buff and Blend materials help distinguish Buff and Blend products from each other, but all Buff and Blend products have an open web. The open web combines abrasive mineral and non-woven nylon fibers with a resin-reinforced bond. The resin bond securely anchors mineral to the fibers, making for a strong, durable abrasive.

  • Gaps between fibers allow swarf to escape, so the abrasive does not get clogged with debris.
  • Minimizing swarf and debris prolongs abrasive service life and keeps minerals cutting sharper for longer.
  • Nylon fibers won't splinter during grinding, offering a good alternative to steel wool.
  • Moreover, as the fibers break down and fresh mineral is exposed, it reduces the likelihood of dull or blunt mineral.

Standard Abrasives™ Buff and Blend products deliver a consistent cut and finish - part after part.

Brochures, Catalogs & Data Sheets
  Add to cart