3M™ Trizact™ Cloth Belt 237AA uses proprietary microreplication technology by 3M where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on an X weight cloth backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.
- Self-sharpening pyramids start sharp, stay sharp, and run cooler than conventional abrasives
- Flexible backing for consistent finish over contours
- Three-dimensional design enables very consistent finishes throughout the abrasive life in robotic applications
- For intermediate finishing and fine polishing prior to plating or buffing
- Ideal for intermediate finishing and fine polishing prior to plating or buffing
- Produces finer finishes than conventional electrostatically coated abrasives
|Width||2-1/2 in||63.5 mm|
|Length||72 in||1828.8 mm|
What is the grit size of the 3M™ Trizact™ Cloth Belt 237AA?
The 3M™ Trizact™ Cloth Belt 237AA has a grit rating of A6 which is equivalent to approximately a 320-400 grit.
How many belts come in one case of the 3M™ Trizact™ Cloth Belt 237AA?
One case of the 3M™ Trizact™ Cloth Belt contains fifty (50) individual belts.
Can I use these belts on any type of sander?
As long as your sander can accommodate for belts that measure
2-1/2 in x 72 in and feature Film-lok backing, then you should have no issue using them. It's always recommended to check with your specific machine manufacturer or consult their manual before purchasing abrasive products.
The 3M™ Trizact™ Cloth Belt 237AA is designed to provide consistent finishes on hard metals such as carbon and stainless steel. The abrasive and resin structure is formulated to break down under medium pressure and keep fresh, sharp mineral cutting. The belt also features a grinding aid that helps prevent heat buildup, warping, and discoloration. The X-weight, durable cloth backing helps provide control, conformability, and effective medium-pressure grinding. The resin bonded abrasive gives you greater heat resistance and helps prevent delamination.Runs Smooth, Finishes Consistently
The belt uses a Film Media Splice, a strong secure bond joining the belt ends, consisting of a thin film-joining media that minimizes "chatter marks," ensures a smooth running belt, and consistent finishing results. Proprietary Trizact™ abrasives produce a finer finish, achieve results faster, and last longer when compared to conventional abrasive products.Ideal for Robotic Finishing and Polishing
3M™ Trizact™ abrasives can consistently deliver near-mirror finishes while also delivering the abrasive life that helps reduce changeouts and downtime in robotic cells. This helps maximize the efficiency of the cell, allowing you to produce more parts per belt. Robotic metal polishing demands the most consistent, refined cut and long abrasive life.The Science of Flawless Finishes
3M™ Trizact™ belts start sharp and stay sharp, resulting in more predictable finishes and improved, consistent quality. They can last up to five times longer than conventional belts and provide precise finish control such that operators can reduce grade sequences, requiring fewer process steps and fewer abrasive products. Three-dimensional structures uniformly distributed over the entire surface of 3M™ Trizact™ abrasives ensure consistent performance and eliminate part to part variation.