3M™ Cloth Belt 341D is a durable aluminum oxide cloth belt recommended for your metal deburring, general metalworking, and some woodworking applications. It is suitable for wide belt, edge, or portable belt sanding, and can be used for a variety of applications on metal substrates and wood.
- Tube-shaped band fits inner and outer contours to remove parting lines, imperfections, and burrs
- X-weight cloth backing withstands heavy sanding and grinding
- Resin bond withstands high heat and pressure
- Tough aluminum oxide abrasive mineral cuts fast and performs well on many substrates
- Bands fit onto a rubber expander wheel attachment (sold separately) for use with a die grinder or rotary drill
|Width||1-1/2 in||38.1 mm|
|Length||18.93 in||480.822 mm|
What makes the 3M™ Cloth Belt 341D a good choice for sanding and grinding applications?
The 3M™ Cloth Belt 341D is made with X-weight cloth backing that provides durability and long-lasting performance in various surface preparation and finishing tasks.
How many pieces are included in each case of the 3M™ Cloth Belt 341D,1-1/2 in x 18-15/16 in size?
Each case contains a total of fifty (50) pieces which offer great value and an economical solution for your sanding needs.
Can this belt be used on all types of metals or just specific ones?
Yes. This abrasive belt can be applied to almost every type of metal, including aluminum, brass, bronze, copper alloys, carbon steel, stainless steel as well as plastics.
. Is there any special equipment needed for operating this product?
. No special equipment is needed to operate our product line. But it works best with contact wheels/pulleys like Dynacushion or Hard Density Wheels/Belts available from us but these products will keep you satisfied.
. Are there additional sizes available other than the one mentioned above when choosing cloth belts from your offerings?
. Yes! We offer multiple dimensions ranging between two-inch width up to four inches wide so that customers have enough flexibility when sanding files or surfaces based on their needs/preferences
Aluminum oxide mineral is a popular choice among industrial professionals because of its cut-rate, durability, and long life. It can be used on a wide variety of materials in both woodworking and metalworking, including ferrous alloys, and is the most commonly used industrial abrasive. The abrasive particles are adhered to the cloth backing with resin, creating a strong bond that withstands high heat and pressure.
Abrasive belts come in many different widths and lengths and are used on a variety of different belt sanding tools for many different applications on both wood and metal. 3M offers a broad selection of belts to fit most any industrial belt sander. Wider belts are used with wide belt sanders to dimension or finish wood panels, smooth rough cut edges of metal sheets, or add a grain pattern to stainless steel sheets. Medium-width belts fit onto edge sanders for sanding flat, narrow surfaces such as panel edges; and narrow belts are used with portable belt sanders for sanding or blending wood pieces such as cabinet doors.
Belts come with various splices that join the belt ends. A film media splice achieves a secure bond with a joining film that minimizes chatter marks, ensures a smooth running belt, and produces consistent finishing results. A sine wave splice is constructed of interlocking fingers that enable the splice to travel smoothly over contact wheels, reduce hinging, and provide added strength to the joint area. Sine wave splices are typically used for coarser grades and wide belts.
Brochures, Catalogs & Data Sheets
- Pdf Brochures_3mtm abrasive belts
- Safety Data Sheet