3M™ Cloth Belt 341D is a durable aluminum oxide cloth belt recommended for your metal deburring, general metalworking, and some woodworking applications. It is suitable for wide belt, edge, or portable belt sanding, and can be used for a variety of applications on metal substrates and wood.
- Tube-shaped band fits inner and outer contours to remove parting lines, imperfections, and burrs
- X-weight cloth backing withstands heavy sanding and grinding
- Resin bond withstands high heat and pressure
- Tough aluminum oxide abrasive mineral cuts fast and performs well on many substrates
- Bands fit onto a rubber expander wheel attachment (sold separately) for use with a die grinder or rotary drill
|Width||25 in||635 mm|
|Length||48 in||1219.2 mm|
What is the purpose of 3M™ Cloth Belt 341D?
The 3M™ Cloth Belt 341D is used for sanding, grinding, and finishing a variety of materials including wood, metal, and composites.
What is P180 X-weight?
P180 X-weight refers to the grit level of the abrasive particles in the belt. In this case, it designates that there are approximately 180 particles per inch and that they are bonded to an X-weight cloth backing material.
How long is each belt in the package?
Each package contains five (5) belts that measure 25 inches x 48 inches each.
What does sine-lok and single-flex mean in regards to these belts?
Sine-lok refers to how the belt attaches to compatible machines using a sine-wave patterned hook-and-loop system. Single-flex means that the belt has been engineered with a single splice joint which adds flexibility for better conformability during use.
Aluminum oxide mineral is a popular choice among industrial professionals because of its cut-rate, durability, and long life. It can be used on a wide variety of materials in both woodworking and metalworking, including ferrous alloys, and is the most commonly used industrial abrasive. The abrasive particles are adhered to the cloth backing with resin, creating a strong bond that withstands high heat and pressure.
Abrasive belts come in many different widths and lengths and are used on a variety of different belt sanding tools for many different applications on both wood and metal. 3M offers a broad selection of belts to fit most any industrial belt sander. Wider belts are used with wide belt sanders to dimension or finish wood panels, smooth rough cut edges of metal sheets, or add a grain pattern to stainless steel sheets. Medium-width belts fit onto edge sanders for sanding flat, narrow surfaces such as panel edges; and narrow belts are used with portable belt sanders for sanding or blending wood pieces such as cabinet doors.
Belts come with various splices that join the belt ends. A film media splice achieves a secure bond with a joining film that minimizes chatter marks, ensures a smooth running belt, and produces consistent finishing results. A sine wave splice is constructed of interlocking fingers that enable the splice to travel smoothly over contact wheels, reduce hinging, and provide added strength to the joint area. Sine wave splices are typically used for coarser grades and wide belts.
Brochures, Catalogs & Data Sheets
- Pdf Posters_3mtm woodworking abras
- Safety Data Sheet