3M™ Trizact™ Cloth Belt 307EA uses proprietary microreplication technology where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on a rayon backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.
- Self-sharpening pyramids start sharp, stay sharp, and run cooler than conventional abrasives
- Flexible backing flows over contoured surfaces for consistent finishing
- Three-dimensional design enables very consistent finishes throughout the abrasive life in robotic applications
- Ideal for intermediate finishing and fine polishing prior to plating or buffing
- Produces finer finishes than conventional electrostatically coated abrasives
|Width||3 in||76.2 mm|
|Length||132 in||3352.8 mm|
What is the belt size of 3M™ Trizact™ Cloth Belt 307EA, A65 JE-weight?
The size of this cloth belt is 3 inches x 132 inches.
How many belts come in a single case of 3M™ Trizact™ Cloth Belt 307EA, A65 JE-weight?
Each case comes with a total of fifty (50) belts.
Can you tell me about the attachment method for these cloth belts?
These cloth belts use Film-lok technology that allows fast and easy changes between abrasive grades or applications.
What makes Full-flex configuration different from other normal sanding materials?
Compared to rigid sandpapers or conventional abrasives, Full-flex construction contours totally to surfaces providing consistent machining performance.
The 3M™ Trizact™ Cloth Belt 307EA is designed to provide consistent finishes on hard metals such as carbon and stainless steel. The abrasive and resin structure is formulated to break down under medium pressure, keeping fresh, sharp mineral cutting. The belt also features a grinding aid that helps prevent heat buildup, warping, and discoloration. The durable cloth backing provides control, conformability, and effective medium-pressure grinding. The resin bonded abrasive gives you greater heat resistance and helps prevent delamination.Smooth Running, Fine Finish
The belt uses a Film Media Splice, a strong secure bond joining the belt ends, consisting of a thin film-joining media that minimizes "chatter marks," ensures a smooth running belt, and consistent finishing results. Proprietary Trizact™ abrasives produce a finer finish, achieve results faster, and last longer when compared to conventional abrasive products.Ideal for Robotic Finishing and Polishing
3M™ Trizact™ abrasives can consistently deliver near-mirror finishes while also delivering the abrasive life that helps reduce changeouts and downtime in robotic cells. This helps maximize the efficiency of the cell, allowing you to produce more parts per belt. Robotic metal polishing demands the most consistent, refined cut, and long abrasive life.The 3M™ Trizact™ Advantage
3M™ Trizact™ belts start sharp and stay sharp, resulting in more predictable finishes and improved, consistent quality. They can last up to five times longer than conventional belts and provide precise finish control, requiring fewer process steps and fewer abrasive products. Three-dimensional structures uniformly distributed over the entire surface of 3M™ Trizact™ abrasives ensure consistent performance and eliminate part to part variation.