through rough waters
Scotch-Brite™ SF Finishing and Deburring Wheel, SF-WL, 8S Fine, 12 in x 2 in x 5 in, 1 ea/Case
$278.44 / Each
| SKU | 7010329175 |
|---|---|
| Legacy SKU | 61500190774 |
| UPC | 00048011332345 |
| Product Number | SF-WL |
The Scotch-Brite SF Finishing and Deburring Wheel is a convolute wheel that balances deburring with finishing removing stubborn burrs while still delivering a fine finish.
- Convolute wheel is soft and conformable, reducing likelihood of gouging or marring the part
- Silicon carbide cuts sharp and fast, enhancing throughput and productivity
- Open non-woven nylon construction helps minimize loading, prolonging abrasive service life
- May be used with bench and pedestal grinders
- Good for deburring, blending and finishing
Product Dimensions |
Imperial | Metric |
| Diameter | 12 in | 304.8 mm |
|---|---|---|
| Center Hole Diameter | 5 in | 127.0 mm |
Shipping Dimensions |
|
| Weight | 4.89867 lb |
|---|---|
| Length | 12.4 in |
| Width | 12.4 in |
| Height | 2.6 in |
| Color | Gray |
|---|---|
| Maximum Speed | 3,000 rpm |
PRODUCT FAQ
-
What materials can I use the Scotch-Brite™ SF Finishing and Deburring Wheel, SF-WL on?
The wheel is highly versatile and works on a wide range of materials including aluminum, brass, stainless steel, carbon steel, titanium and many others.
-
Does this wheel require any specific equipment for installation?
No. The Scotch-Brite™ SF Finishing and Deburring Wheel comes with a standard arbor hole which means that it can be mounted onto various bench grinders or other equipment without needing any special installation tools.
-
Can the wheel work effectively in wet conditions?
Yes. Apart from being flexible enough to conform to complex shapes for better results while deburring or finishing metal workpieces, its open web design also prevents loading when used wet or dry.
-
How durable is this product?
The proprietary resin system and synthetic fibers used in making the wheel make it resistant to wear even after extended periods of use. But like all abrasive products durability depends greatly on application parameters such as contact pressure, RPMs etc.
The Scotch-Brite™ SF Finishing and Deburring Wheel is constructed using a non-woven abrasive web wrapped around a fiberglass core. The surface of the web becomes the cutting tool with convolute wheels. The wheels are one directional, indicated by an arrow on the side of the wheel and arrows printed on the core. It is imperative to follow the direction indicated on the wheel for optimal wheel performance and operator safety. The SF wheel falls in the middle in terms of aggressiveness and durability when compared to other Scotch-Brite™ materials. It could be considered medium-density, making it perfect for balancing deburring with finishing. It is aggressive enough to tackle flash and imperfections, while soft enough to not severely gouge the part.
Key Ingredients: Silicon Carbide, Resin and NylonThe Scotch-Brite™ SF Finishing and Deburring Wheel uses a combination of non-woven nylon fibers and silicon carbide mineral as the abrasive material. A resin bond is used to combine these elements. The resin bond breaks down gradually while the wheel wears, helping with overall heat resistance. It is an excellent option when finish is critical on deburring applications. Silicon carbide mineral is very hard and fractures easily, resulting in freshly exposed sharp edges that cut extra fast and produce a smooth, professional-looking finish. While it wears faster than aluminum oxide, it produces a superior finish.
Key Strike a BalanceThe Scotch-Brite™ SF Finishing and Deburring Wheel is commonly used for general deburring of machined and formed parts, deburring and finishing turbine blades, gun barrel polishing, golf club finishing, and medical component deburring and finishing. This wheel is uniquely equipped to help operators remove flash and imperfections while achieving a refined and polished finish.