Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
SKU 7010329778
Legacy SKU 62427995352
UPC 00021200300783
Product Number 30H

3M™ Low Mist Contact Adhesive 30 is a water-dispersed, high-strength adhesive that provides high coverage and immediate bond strength. It features a long bonding range and good heat resistance. The low mist formula helps reduce waste, providing an economical solution that maximizes coverage when sprayed.

  • Bonds most foamed plastics, plastic laminate, wood, plywood and canvas to themselves and to each other
  • Post-formable, heat resistant and non-flammable in the wet state
  • Low mist formula reduces waste and improves coverage over standard sprays
  • Creates a very high strength, heat resistant bond
  • Adhesive can be applied by spray, brush or rolled to help improve efficiency in application
  Add to cart
On it's way to you October 30  


Minimum Order 52 US gallons
Order Increment 52 US gallons
Immense Durability
Multi-Purpose Uses
Fast Shipping
Industry Low Price
Product Dimensions
Imperial Metric
Shipping Dimensions
Weight 523.292 lb
Length 23.7 in
Width 23.7 in
Height 34.8 in
Color Green


  1. What is the composition of 3M™ Fastbond™ Contact Adhesive 30H?

    3M™ Fastbond™ Contact Adhesive 30H is a water-dispersed high strength adhesive formulated to have high solid content for bonds that require extended open time. It consists mostly of synthetic polymers and resins.

  2. What kind of surfaces can I use this adhesive on?

    This contact adhesive can be used on a variety of substrates, including metals, wood, glass, rubber, plastics and vinyls. However, it is recommended to test the compatibility with your specific materials before using.

  3. How much area will be covered by one drum of this adhesive?

    One 55 gallon open head drum with poly liner (52 gallon net) can cover approximately up to 5000 sq feet based on an application rate of approximately 6-9 square yards per gallon.

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
Low Mist Adhesion

3M™ Low Mist Contact Adhesive 30 is a one-part, water-dispersed contact adhesive that creates a very high strength bond capable of resisting high temperatures. With a four-hour bonding range, this adhesive is post-formable, heat resistant and non-flammable in its wet state, which may help reduce risk of fire and assist with compliance for insurance regulations. The low mist formulation provides an economical, high coverage spray that maximizes the adhesive. It is ideal for decorative laminate applications where non-flammability and low VOCs are critical. However, this product is not recommended for drywall laminating or for bonding metal surfaces.

Recommended Applications
  • Most formed plastics
  • Plastic laminate
  • Wood
  • Plywood
  • Wood veneer
  • Canvas
High Immediate Strength, Long Bonding Range

Formulated for success, 3M™ Low Mist Contact Adhesive 30 delivers high immediate bonding strength with a long bonding range. This design offers a great solution for bonding porous substrates to porous or non-porous substrates with time for positioning and adjustments.

Applying Your Adhesive

Whether it is being sprayed, brushed or rolled on, the application of your 3M™ adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you've formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Effective adhesive coverage is accomplished when 80% or more of the surface is covered. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch, and then proceed with the application of the additional coat.

Brochures, Catalogs & Data Sheets
Other Products in this Family

Lead times are estimates and may vary based on our suppliers' product availability.