Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
Welcome Guest

Clear All Filters  

Standard Abrasives™ Cartridge RoII Mandrel 710893, 1/8 in x 1/2 in x 1/8 in x 1 in x 2-1/2 in CM-3, 5/Bag, 100 ea/Case

Standard Abrasives™

$3.90 / Each

SKU 7010330489
Legacy SKU 66000051251
UPC 00051115375255
Product Number 710893

Standard Abrasives Cartridge Roll Mandrels is a tool attachment that holds an abrasive cartridge roll (sold separately). Together, the mandrel and cartridge roll grind and finish hard-to-reach areas of a workpiece, such as angles and curves.

  • Fits all Standard Abrasives™ Straight, Full Tapered and Half Tapered Cartridge Rolls
  • Shank of the mandrel is secured into the collet assembly or drill chuck of a rotary power tool
  • Mandrel enables access to tight spaces with a cartridge roll
  • Comes in various pilot diameters and lengths to fit different cartridge rolls
  • Made of plated steel for enhanced durability
  Add to cart
On it's way to you May 6   

Qty

Minimum Order 5 Items
Order Increment 5 Items
  Multi-Functional
  High Performance
  Fast, Global Shipping
  Industry Low Price
Product Dimensions
 Imperial Metric
Weight 0 NULL
Width 0 null
Length 0 null
Height 0 null
Shipping Dimensions
Weight 6.125 lb
Length 12.1248 in
Width 4.3748 in
Height 4.25 in

PRODUCT FAQ

  1. What is the Standard Abrasives™ Cartridge Roll Mandrel 710893?

    It is a tool for holding cartridge rolls, allowing them to be used with rotary tools.

  2. What are the dimensions of this mandrel?

    This cartridge roll mandrel has measurements of 1/8 inch x 1/2 inch x 1/8 inch x 1 inch x 2-½ inches CM-3.

  3. Are there any other sizes available for this product?

    Yes, we have varied sizes that may fit your specific needs.

  4. How can I use this product effectively?

    Insert the cartridge roll into the mandrel and tighten it securely in place. Then attach it to your desired rotary tool. Now you're ready for your abrasive work!

  5. How many pieces come in each case?

    There is one Standard Abrasives™ Cartridge Roll Mandrel included per casing every time you purchase.

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
Standard Abrasives™ Cartridge Roll Mandrels

Standard Abrasives™ Cartridge Roll Mandrels are the perfect tool for grinding and finishing in hard-to-reach areas. These mandrels are designed to enhance the usability of Standard Abrasives™ Cartridge Rolls (sold separately) by linking the cartridge roll to the power tool. The mandrel adds length to the cartridge roll, allowing it to reach even further into those seemingly inaccessible nooks and crannies. It attaches to a rotary tool such as a die grinder or drill and comes in different sizes to fit a variety of cartridge roll sizes.

Tips for Optimal Use

For safety, Standard Abrasives recommends that the mandrel pilot length used to drive a cartridge roll should measure at least 1/2 inch less than the overall length of the cartridge roll. This means that if a cartridge roll measures 2 inches in overall length, the corresponding mandrel should have a pilot length of no less than 1-1/2 inches.

The versatile range of diameter sizes of Standard Abrasives™ Cartridge Roll Mandrels enables operators to select the right mandrel for their power tool and cartridge roll. The mandrel consists of a shank and a pilot. The shank end fits into the tool chuck or collet while the pilot end fits into the arbor hole on the cartridge roll. The mandrel was conveniently designed to fit all shapes of abrasive cartridge rolls, including straight, full tapered, half tapered, sidewall. It is made with plated steel for added durability. It may be used with a die grinder or random orbital sander.

  • Designed to help users get inside diameters and holes to swiftly grind and finish
  • Enhances usability of Standard Abrasives™ Cartridge Rolls (sold separately)
  • Attaches to a rotary tool such as a die grinder or drill
  • Comes in different sizes to fit a variety of cartridge roll sizes
  • Plated steel construction for added durability
  • May be used with a die grinder or random orbital sander
Brochures, Catalogs & Data Sheets
  Add to cart