A smooth ride
through rough waters
through rough waters
Welcome Guest
Standard Abrasives™ Aluminum Oxide Square Pad, 730415, 80, 4 in x 4 in x 3/8 in x 1/4"-20, 100 ea/Case
$12.68 / Each
| SKU | 7010331163 |
|---|---|
| Legacy SKU | 66000238411 |
| UPC | 00051141430300 |
| Part Number | 730415 |
The Standard Abrasives™ Aluminum Oxide Square Pad enables aggressive access to tight angles such as channels, fillets and corners. Used for grinding and deburring, the pad has folded layers of abrasive cloth provide fresh mineral as the corners wear away and absorb vibration to reduce chatter for smooth results.
- Pad corners perform fast grinding, deburring, and polishing on channels, fillets and corners
- Folded abrasive cloth produces cushioned, chatter-free grinding
- Pad size is convenient for spotting on flat surfaces
- Mandrel use increases range and versatility
- Resin bond system provides good grain retention and life
Product Dimensions |
Imperial | Metric |
| Width | 4 in | 101.6 mm |
|---|---|---|
| Length | 4 in | 101.6 mm |
| Thickness | 3/8 in | 9.525 mm |
Shipping Dimensions |
|
| Weight | 24.3 lb |
|---|---|
| Length | 13.25 in |
| Width | 13.25 in |
| Height | 14.25 in |
| Color | Brown |
|---|---|
| Maximum RPM | 6,000 |
| Grit | 80 |
- Pdf Catalogs_standard ab coated bo
- Safety Data Sheet
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. 
Tips for Optimal Use
A Standard Abrasives™ Aluminum Oxide Square Pad is constructed by folding strips of coated abrasive material over a metal eyelet to form a square abrasive pad. As the pad rotates, the corners provide fast biting action, wearing down to expose fresh mineral. Square pads run smoothly and offer great control and access for corner weld grinding and cleaning. They are a bit more aggressive than cross pads given their square design, so they're a good choice for tougher grinding and blending applications. Small size pads are ideally suited for tubes and internal diameters. These pads may be used with portable die grinders to facilitate easier and closer access to the workpiece, and the metal eyelet attaches to a mandrel —long or short — enabling the operator to tighten or extend the abrasive's proximity to the part.
Achieve a Sharp Cut and Soft Scratch Pattern
Aluminum oxide mineral delivers a soft scratch pattern that is often desirable for finishing and polishing. Aluminum oxide is a popular mineral choice among industrial professionals because of its fast cut and long life. It's suitable for use on many metals, including mild and carbon steel. Aluminum oxide mineral is adhered to the backing in a closed coat construction — meaning the mineral covers 100% of the backing. The greater grain density of this coated abrasive equates to finer finishes. Add to cart
A Standard Abrasives™ Aluminum Oxide Square Pad is constructed by folding strips of coated abrasive material over a metal eyelet to form a square abrasive pad. As the pad rotates, the corners provide fast biting action, wearing down to expose fresh mineral. Square pads run smoothly and offer great control and access for corner weld grinding and cleaning. They are a bit more aggressive than cross pads given their square design, so they're a good choice for tougher grinding and blending applications. Small size pads are ideally suited for tubes and internal diameters. These pads may be used with portable die grinders to facilitate easier and closer access to the workpiece, and the metal eyelet attaches to a mandrel —long or short — enabling the operator to tighten or extend the abrasive's proximity to the part.
Achieve a Sharp Cut and Soft Scratch Pattern
Aluminum oxide mineral delivers a soft scratch pattern that is often desirable for finishing and polishing. Aluminum oxide is a popular mineral choice among industrial professionals because of its fast cut and long life. It's suitable for use on many metals, including mild and carbon steel. Aluminum oxide mineral is adhered to the backing in a closed coat construction — meaning the mineral covers 100% of the backing. The greater grain density of this coated abrasive equates to finer finishes. Add to cart