through rough waters
Standard Abrasives™ Buff and Blend Flap Brush 875025, 6 in x 2 in x 2 in FB072 15-87 A VFN Medium Density, 2 ea/Case
$89.95 / Each
| SKU | 7010367153 |
|---|---|
| Legacy SKU | 66000042961 |
| UPC | 00051115366963 |
| Product Number | 875025 |
The conformability and consistent performance of the Standard Abrasives Buff and Blend Flap Brush makes it ideal for blending, cleaning, deburring and finishing on stainless steel, brass and aluminum, especially where a uniform and long line brushed finish is desired.
- Well-suited for finishing, cleaning, and blending applications on aluminum, brass and stainless steel
- Tough nylon face removes surface contaminants without leaving lines or gouging the work piece
- Conformable flaps deliver a consistent in-line brush finish for stainless steel and aluminum parts, leaving no lines on the surface
- Open web design resists loading and eliminates metal contamination of workpiece
- Resin coated surface runs cool and is waterproof for use with lubricants
- Various sizes available for wide range of tools: straight shaft portable grinder, bench motor, backstand, floor lathe, rotary, straight line, and robotic
Product Dimensions |
Imperial | Metric |
| Weight | 0 NULL | |
|---|---|---|
| Width | 0 null | |
| Length | 0 null | |
| Height | 0 null | |
| Diameter | 6 in | 152.4 mm |
Shipping Dimensions |
|
| Weight | 2.106 lb |
|---|---|
| Length | 6.3748 in |
| Width | 6.3748 in |
| Height | 4.6878 in |
| Color | Maroon |
|---|---|
| Thread Size | Non Pertinent |
| Maximum Speed | 3,400 rpm |
PRODUCT FAQ
-
What is the 3M Standard Abrasives™ Buff and Blend Flap Brush made of?
The brush is made of a durable, three-dimensional material that provides consistent performance over time.
-
Will this flap brush work on my stainless steel surface?
Yes, the flap brush works effectively on a wide variety of metals including stainless steel.
-
Can I use this flap brush on curved or irregular surfaces?
Absolutely! The conformable design allows for easy use on contoured, irregular or low-profile surfaces.
-
How long does each flap brush last before it needs to be replaced?
This will depend on several factors such as intensity of usage and application specifics but generally you can expect exceptional durability.
-
Are there any safety guidelines in using these kinds of brushes?
. We always prioritize safety with our products so we recommend taking appropriate measures such as wearing personal protective equipment like goggles, gloves etc., reading instructions & warnings mentioned in the product packaging prior to usage - even if you are already familiar with similar solutions from our lineup.
Standard Abrasives™ Buff and Blend products are made from tough, resin-reinforced nylon fiber with aluminum oxide abrasive grain. The durable high strength construction of the Standard Abrasives™ Buff and Blend Flap Brush provides aggressive, controlled action and a consistent, uniform finish without leaving behind parting lines. Non-woven construction conforms to workpiece contours, curves, and ridges and allows removing surface contaminants without eliminating critical detail or gouging the workpiece. Choose from a broad offering of sizes, densities and grades to suit many different finishing operations.
A Buff and Blend Flap Brush is an ideal choice for:- A grain finish on brass strike plates for door hardware
- A satin finish on builders' hardware (cabinet handles, door knobs, and more)
- Satin finishes on soft metals
- Inline brushed finishes on aluminum and stainless cookware (pots and pans)
- Producing fine scratch patterns on utensils and cutlery prior to cotton buff and compound polishing
- Removing oxide from precious metals
- Blending flash and parting lines on aluminum die cast
Flap brushes produce a consistent finish which does not reflect lines commonly attributed with ganged arbor hole discs. Density, pressure and angle determine the ability of the flap brush to remove burrs, oxidation and handling marks. The abrasive material provides ventilation which helps dissipate heat and, therefore, runs cooler. This provides consistent finishes without smearing or otherwise discoloring the work piece. Minimal vibration can reduce chattermarks on the workpiece and can lead to less operator and machine fatigue.
Load-Resistant Construction Boosts Life and PerformanceStandard Abrasives™ Buff and Blend products are load-resistant to keep you cutting with fresh mineral. The gaps in the open web allow unwanted swarf to escape. Consequently, less debris clogs the abrasive, so the mineral can stay fresh, keep cutting sharp and deliver a consistent cut over the life of the product. As the fibers break down and fresh mineral is exposed, it reduces the likelihood of dull or blunt mineral smearing the surface, contributing to cleaner surfaces and less re-work. Furthermore, manual fatigue that may result from applying heavy pressure to a dull abrasive is reduced.
The Many Benefits of Standard Abrasives™ Buff and Blend ProductsStandard Abrasives™ Buff and Blend products invigorate deburring, cleaning, blending and finishing applications by helping operators reduce finishing steps, minimize costs and achieve greater throughput. Each Buff and Blend product and grade offers unique benefits, so operators can choose from a versatile range of options to ensure superior performance on specific applications.