A smooth ride
through rough waters
through rough waters
Welcome Guest
3M™ Rocker Schutz™ Coating, 08874, 1 quart, 6 per case
$53.83 / Canister
| SKU | 7010367960 |
|---|---|
| Legacy SKU | 62581865094 |
| UPC | 00051135088746 |
| Part Number | 08874 |
3M™ Rocker Schutz™ Coating is a tough, chip-resistant coating developed specifically for restoring and protecting rocker panels and similar vehicle areas during collision repair. This coarse-textured coating can be easily thinned and tinted to match OEM textures. Spray-on coating is very easy to use: it is tack free in as little as five minutes and paintable in as little as 30 minutes.
- Formulated specifically for repairing and protecting rocker panels and other vulnerable vehicle areas
- Durable coating contains nitrile rubber to protect against chips, water and corrosion
- Tested for adherence to steel and primed surfaces
- Can be thinned and tinted to match OEM color and texture
- Tack free in as little as 5 minutes and paintable in as little as 30 minutes for excellent shop efficiency
- Applies smoothly and easily with 3M™ Body Shutz Applicator Gun
Product Dimensions |
Imperial | Metric |
| Weight | 1.84 LBS |
|---|
Shipping Dimensions |
|
| Weight | 11.5 lb |
|---|---|
| Length | 11.2 in |
| Width | 7.7 in |
| Height | 8 in |
- Pdf Data Sheets_tds 08874 3m rocke
- Data Sheet
- Data Sheet
- Safety Data Sheet
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. 
A Coating for Some of the Toughest Places in Collision Repair
3M formulated 3M™ Rocker Schutz™ Coating for some of the most demanding collision repair jobs: repairing rocker panels and other vehicle areas that can be neglected even as they are exposed to salt and other chemicals close to the roadway. This tough, chip-resistant coating contains nitrile rubber and has been tested for excellent adhesion to metals and primers as well as resistance to salt, moisture and small impact from sand and gravel. This is especially important for newer-model trucks and other vehicles where rocker panels are more integral to the overall strength of the vehicle frame. The coating applies easily, becomes tack free in as a little as 5 minutes and is paintable in as little as 30 minutes to save time and money in the shop.
3M™ Rocker Schutz™ Coating features a coarse consistency that is easily adjusted using lacquer-based thinner, making it easy to match OEM panel textures. It also is tintable with enamel or lacquer type paint for near-exact color matching. Use with the 3M™ Body Shutz Applicator Gun 08997.
The Science of Collision Repair Coatings from 3M
3M has long been developing new ways to apply science to the lives of professionals in a range of industries including collision repair. 3M™ Rocker Schutz™ is a great example – decades of knowledge in a product that delivers better results in time and quality even for the most specific jobs, and helps you get the most value and customer satisfaction from your entire operation. Add to cart
3M formulated 3M™ Rocker Schutz™ Coating for some of the most demanding collision repair jobs: repairing rocker panels and other vehicle areas that can be neglected even as they are exposed to salt and other chemicals close to the roadway. This tough, chip-resistant coating contains nitrile rubber and has been tested for excellent adhesion to metals and primers as well as resistance to salt, moisture and small impact from sand and gravel. This is especially important for newer-model trucks and other vehicles where rocker panels are more integral to the overall strength of the vehicle frame. The coating applies easily, becomes tack free in as a little as 5 minutes and is paintable in as little as 30 minutes to save time and money in the shop.
3M™ Rocker Schutz™ Coating features a coarse consistency that is easily adjusted using lacquer-based thinner, making it easy to match OEM panel textures. It also is tintable with enamel or lacquer type paint for near-exact color matching. Use with the 3M™ Body Shutz Applicator Gun 08997.
The Science of Collision Repair Coatings from 3M
3M has long been developing new ways to apply science to the lives of professionals in a range of industries including collision repair. 3M™ Rocker Schutz™ is a great example – decades of knowledge in a product that delivers better results in time and quality even for the most specific jobs, and helps you get the most value and customer satisfaction from your entire operation. Add to cart