3M™ Double Coated Polyethylene Foam Tape 4492 is a black or white, closed-cell, polyethylene foam carrier. It is formulated for more demanding indoor and outdoor mounting and bonding applications. A noted feature of Foam Tape 4492 is its ability to conform and bond to irregular surfaces. It offers good temperature resistance and long term durability.
- 0.031 in. (0.8 mm) closed-cell polyethylene foam carrier
- High ultimate adhesion to a wide variety of surfaces
- Conformable tape bonds to irregular surfaces
- Unique acrylic adhesive system provides long term durability
- Good initial and long-term temperature resistance
- This product is white
|Width||2 in||50.8 mm|
|Length||72 yd||65.83 m|
What is 3M™ Double Coated Polyethylene Foam Tape 4492W used for?
3M™ Double Coated Polyethylene Foam Tape 4492W is designed to provide high shear strength, which makes it an ideal choice for bonding applications that require a strong and reliable hold. It can be used on various surfaces including rough or irregular ones.
Is the tape waterproof?
Yes, this particular tape is water-resistant and can withstand humid conditions without losing its adhesive properties.
How much tape comes in each roll and case of the double-coated polyethylene foam tape?
There are six rolls of 2" x 72 yd (31 mil) white double-coated polyethylene foam tapes included per case.
Do I need any special tools to apply this product to my surfaces?
The good news about this product is that it does not require any specific application tool other than clean scissors or knife. Just make sure the surface you plan on applying the tape to should be cleaned properly help ensure optimal adhesion.
. Can I use this outside too?
. You certainly can! In addition to being resistant against water/humidity (also mentioned earlier), the acrylic adhesive also provides UV resistance if wanted to use in outdoor applications which avoids yellowing over time as well as splitting/cracking caused by exposure from sunlight.
Speed up the mounting process and achieve a more aesthetically pleasing installation with 3M™ Double Coated Polyethylene Foam Tape 4492. This 1/32 in. thick polyethylene foam tape is known for its high ultimate adhesion and reliable performance across many surfaces. One of its noted features is its ability to conform to irregular substrates. It provides high ultimate adhesion to many plastics and is formulated for demanding indoor and outdoor general purpose mounting and bonding applications. Common uses include automotive mirror bonding, decorative trim, nameplates and other general purpose mounting applications.Recommended Application
- Indoor general purpose mounting and joining
- Automotive mirror bonding
- Decorative trim
- Nameplate mounting
- Point-of-purchase displays and signs
3M double coated tapes offer speed, strength and improved aesthetics to your mounting application. Instead of mechanical fasteners such as screws, bolts and studs, double coated tapes leave no puncture holes. These tapes can be easily applied by hand or with a dispenser, with no special application equipment required for a firm bond.What is Double Coated Tape?
In general, double coated tape is composed of a foam, paper, film, or tissue carrier that is coated on both sides with pressure sensitive adhesive. The adhesive is protected by a peel-away liner that can be removed at the time of application or left in place until the joining surfaces are ready to be attached. Applications for double coated tape are found in construction, fabrication, arts, and hobby. For bonding rough or irregular surfaces, 3M™ Double Coated Foam Tapes fill gaps and distribute stress uniformly over the bonded area.