3M™ Scotchcast™ Electrical Resin 226 is a 2-part, liquid-type product that is useful for electronic and electrical applications requiring the highest level of protection. This unfilled, castro-based polyurethane resin has a very low-viscosity property, which makes it easy to infuse on any surface. It is useful for wide range of electrical and electronic potting and casting applications.
- 75 Shore A hardness
- Has 15-minute gel time at 140 degrees F (60 degrees C)
- Useful for coating coils, transformers, motors, modules, electrical and electronic components
- Withstands a temperature range of 32 to 266 degrees F (0 to 130 degrees C)
- Elongates 105% longer than its original size for easy insulation or wrapping
- Chemical- and moisture-resistant
- ASTM Approved, MIL-I-16923E Certified and RoHS 2011/65/EU Compliant
Brochures, Catalogs & Data Sheets
For industrial/occupational use only. Not for consumer sale or use.3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
3M™ Scotchcast™ Electrical Resin 226 has a low gel point rating to ensure curing at room temperature. The high-tensile strength of the resin exhibits a flexible and good adhesion property after curing. It is ideal for applications that need excellent thermal shock and mechanical shock resistance. Its high dielectric strength offers excellent electrical insulating property to the resin. It has a high flash point, preventing any fire hazard due to quick ignition. Since the resin exhibits a hydrolytic stability property, it minimizes quick chemical decomposition, thus providing long-lasting usage. ASTM Approved, MIL-I-16923E Certified and RoHS 2011/65/EU Compliant. Add to cart