A smooth ride
through rough waters
through rough waters
Welcome Guest
3M™ Venting Tape 3294, Pink, 1 in x 36 yd, 5 mil, 36 rolls per case
$19.45 / Roll
| SKU | 7100009843 |
|---|---|
| Legacy SKU | 70006209327 |
| UPC | 00021200266669 |
| Product Number | 3294 |
3M™ Venting Tape 3294 is a pink non-woven, synthetic backing with a strip-coated low-tack pressure sensitive acrylic adhesive for use in various venting applications requiring high outgassing rates.
- Features a unique non-woven conformable backing that has high air/gas permeability
- Meets most outgassing requirements for foam-in-place insulation processes
- Adhesive is strip-coated so uncoated areas have higher permeability to help minimize foaming voids
- Commonly used for outgas venting in appliance manufacturing
Product Dimensions |
Imperial | Metric |
| Weight | 0.172 LBS | |
|---|---|---|
| Width | 1 in | 2.5 cm |
| Length | 36 yd | 32.9 m |
| Height | 4 mil | 0.1 mm |
| Thickness | 5 mil |
Shipping Dimensions |
|
| Weight | 6.82 lb |
|---|---|
| Length | 10.8 in |
| Width | 10.8 in |
| Height | 10.1 in |
| Color | Pink |
|---|
- Pdf Catalogs_3m masking and surfac
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. 
Conformable, Non-Woven Backing Offers High Air/Gas Permeability
We manufacture 3M™ Venting Tape 3294 to meet various high outgassing requirements for foam-in-place insulation processes in appliance and other industries. The acrylic adhesive is strip-coated so uncoated areas have higher permeability to help minimize foaming voids. The non-woven, synthetic backing is conformable with good burst strength for effective sealing and minimal foaming voids to help reduce clean-up.
Recommended applications:
To allow the confinement and outgassing of foam insulation
Used in Foam-In-Place Manufacturing Process
A common challenge in refrigerator and freezer manufacturing is the venting of insulation foam gasses while keeping foam in place. Our venting tape is used to cover openings in the cabinet of refrigerators and freezers during the foam-in-place manufacturing process. It allows air and gases to escape while keeping solids (such as urethane foam) in place. The air-permeable, non-woven backing of 3M™ Venting Tape 3294 keeps foam-in-place insulation inside door and appliance cavities, while helping eliminate voids.
Bringing Better Ideas to the Surface through Science and Innovation
In our 3M Industrial Adhesives and Tapes Division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently. Add to cart
We manufacture 3M™ Venting Tape 3294 to meet various high outgassing requirements for foam-in-place insulation processes in appliance and other industries. The acrylic adhesive is strip-coated so uncoated areas have higher permeability to help minimize foaming voids. The non-woven, synthetic backing is conformable with good burst strength for effective sealing and minimal foaming voids to help reduce clean-up.
Recommended applications:
To allow the confinement and outgassing of foam insulation
Used in Foam-In-Place Manufacturing Process
A common challenge in refrigerator and freezer manufacturing is the venting of insulation foam gasses while keeping foam in place. Our venting tape is used to cover openings in the cabinet of refrigerators and freezers during the foam-in-place manufacturing process. It allows air and gases to escape while keeping solids (such as urethane foam) in place. The air-permeable, non-woven backing of 3M™ Venting Tape 3294 keeps foam-in-place insulation inside door and appliance cavities, while helping eliminate voids.
Bringing Better Ideas to the Surface through Science and Innovation
In our 3M Industrial Adhesives and Tapes Division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently. Add to cart
