Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
Welcome Guest

Clear All Filters  

3M™ Venture Tape™ Aluminum Foil Tape 3520CW, Silver, 55 in x 250 yd, 3.7 mil, 1 Roll/Case

Venture Tape™

$1,863.80 / Roll

SKU 7100037483
Legacy SKU 70006731650
UPC 00051128950111
Catalog Number 3520CW
Product Number 3520CW

Aluminum Foil Tape Ideal for HVAC Applications
Designed for performance even in very cold temperatures, 3M Venture Tape Aluminum Foil Tape 3520CW is a 2.0 mil aluminum foil tape that excels in demanding applications. Its foil backing and cold-weather pressure sensitive acrylic adhesive perform in temperatures from -40 to 250F/-40 to 121C. The aluminum foil backing conforms well around corners and to irregular surfaces. This tape provides an excellent vapor seal in various duct sealing applications. It is hand tearable and installs easily, eliminating the need for additional tools or application methods.

3M Venture Tape Aluminum Foil Tape 3520CW is UL723 Classified (10/10 Flame Smoke Rating).

Recommended Applications


Vapor seals for fibrous and sheet metal ducts
Heavier general purpose construction applications


Excellent Cold Weather Performance
3M Venture Tape Aluminum Foil Tape 3520CW is coated with a special cold weather, pressure sensitive acrylic adhesive system that performs exceptionally well in cold weather conditions, yet still excels at normal and elevated temperatures. It adheres immediately on contact to a variety of materials, including fibrous and sheet metal ducts. Once bonded, this tape features good aging properties that resist lifting and curling over time.

3M Metal Foil Tapes
Aluminum is just one of the metal-backed tapes available from 3M. These foil tapes resist failure from common sources of degradation including moisture, ultraviolet rays and many chemicals, and are commonly used for reflecting, wrapping, masking, sealing, and more in applications from air ducts to washing machines. As with all 3M products, 3M Venture Tape Aluminum Foil Tape 3520CW is supported by exclusive 3M technical expertise and application advice. 3M Aluminum foil tapes are suitable for demanding applications in construction, aerospace, automotive, appliance, maintenance, repair and operations and many more segments. They are also thermally conductive for heating/cooling efficiency.

Bringing Better Ideas to the Surface through Science
The 3M Industrial Adhesives and Tapes Division applies the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, 3M IATD technologies help customers like you deliver competitive products to the market faster and more efficiently.

  • 2.0 mil aluminum foil tape is ideal for HVAC applications
  • Acrylic adhesive is specifically designed to perform in temperatures from -40°F to 250°F
  • Excellent for high heat and humidity conditions
  • Flexible backing conforms well to curved and irregular surfaces
  • Hand tearable and easy to install on site without special tools or applications methods
  • Features easy release kraft liner
  Add to cart
On it's way to you May 28  

Qty

Minimum Order 1 Roll
Order Increment 1 Roll
  High Temperature Resistance
  Durable
  Global Shipping
  Industry Low Price Per Roll
Product Dimensions
 Imperial Metric
Weight 0 NULL
Width 0 null
Length 0 null
Height 0 null
Shipping Dimensions
Weight 168.20609 lb
Length 14.13386 in
Width 14.13386 in
Height 55.51181 in
Color Silver

PRODUCT FAQ

  1. What is the 3M™ Venture Tape™ Aluminum Foil Tape 3520CW made of?

    The tape is made of aluminum foil and has a glossy finish.

  2. What makes this tape different from other tapes in the market?

    This tape can be easily applied even on cold surfaces, it bonds well to most substrates including fibrous and sheet metal ducts, features heat reflecting properties keeping both coolness or warmth in- depending upon the requirement.

  3. Can I use this tape outdoors without worrying about its performance getting affected due to weather conditions

    Yes! This foil tape works effortlessly fine under extreme temperature going as low as -40°F (-40°C) upto +300°F (149°C)

  4. How wide is each roll of 3M™ Venture Tape™ Aluminum Foil Tape 3520CW?

    Each roll comes with a width that measures 55 inches which gives you broad coverage area

  5. Is one roll sufficient for smaller jobs at home

    The length may vary depending upon your needs . One case includes one roll which is long enough measuring up-to yd (750 ft/225 mtrs).

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
Aluminum Foil Tape Ideal for HVAC Applications

3M™ Venture Tape™ Aluminum Foil Tape 3520CW is a 2.0 mil aluminum foil tape that is designed for performance even in very cold temperatures. Its foil backing and cold-weather pressure sensitive acrylic adhesive perform in temperatures from -40 to 250°F/-40 to 121°C. The tape conforms well around corners and to irregular surfaces, making it ideal for demanding applications.

This tape provides an excellent vapor seal in various duct sealing applications. It is hand tearable and installs easily, eliminating the need for additional tools or application methods. 3M™ Venture Tape™ Aluminum Foil Tape 3520CW is UL723 Classified (10/10 Flame Smoke Rating).

Recommended Applications
  • Vapor seals for fibrous and sheet metal ducts
  • Heavier general purpose construction applications

3M™ Venture Tape™ Aluminum Foil Tape 3520CW is coated with a special cold weather, pressure sensitive acrylic adhesive system that performs exceptionally well in cold weather conditions, yet still excels at normal and elevated temperatures. It adheres immediately on contact to a variety of materials, including fibrous and sheet metal ducts. Once bonded, this tape features good aging properties that resist lifting and curling over time.

Aluminum is just one of the metal-backed tapes available from 3M. These foil tapes resist failure from common sources of degradation including moisture, ultraviolet rays and many chemicals, and are commonly used for reflecting, wrapping, masking, sealing, and more in applications from air ducts to washing machines. As with all 3M products, 3M™ Venture Tape™ Aluminum Foil Tape 3520CW is supported by exclusive 3M technical expertise and application advice. 3M Aluminum foil tapes are suitable for demanding applications in construction, aerospace, automotive, appliance, maintenance, repair and operations and many more segments. They are also thermally conductive for heating/cooling efficiency.

Bringing Better Ideas to the Surface through Science

The 3M Industrial Adhesives and Tapes Division applies the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, 3M IATD technologies help customers like you deliver competitive products to the market faster and more efficiently.

Brochures, Catalogs & Data Sheets
  Add to cart
Other Products in this Family