Welcome Guest
SKU | 7100039260 |
---|---|
Legacy SKU | 62390708600 |
UPC | 00048011627281 |
Product Number | AC77 |
3M™ Scotch-Weld™ Instant Adhesive Primer AC77 is designed for use on difficult-to-bond low surface energy plastics such as polypropylene, polyethylene, TPO, UHMW and PTFE. Surface preparation and application are straightforward and the adhesive primer is fast drying to keep jobs moving quickly.
- Improves adhesion on rigid plastics, including low surface energy materials
- Fast drying to keep jobs moving quickly
- Contains cure accelerator
- Straightforward surface preparation and easy application
Product Dimensions |
Imperial | Metric |
Weight | 0.04 LBS |
---|
Shipping Dimensions |
|
Weight | 0.52 lb |
---|---|
Length | 8.149 in |
Width | 3.543 in |
Height | 5.078 in |
Color | Transparent |
---|
- Pdf Data Sheets_scotch weld cyan a
- Data Sheet
- Data Sheet
- Safety Data Sheet
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
Designed for Difficult-to-Bond, Low Surface Energy Plastics
3M™ Scotch-Weld™ Instant Adhesive Primer AC77 is designed for difficult-to-bond, low surface energy plastics such as polypropylene, polyethylene, and PTFE. This primer should be applied to each low surface energy substrate surface to achieve desired results.
Recommended Applications
Improves adhesion of cyanoacrylate adhesives to:
Difficult-to-bond rigid plastic
Polyethylene (PE)
Polypropylene (PP)
Acetal
PTFE
TPO
3M™ Scotch-Weld™ Instant Adhesive Primer AC77 is a low surface energy instant adhesive primer. Note: This product should be tested on substrates before use since its overspray or excess may attack certain substrates (especially some plastics) causing unsightly effects. Surface preparation and application are straightforward and can be completed as follows:
Apply primer to all difficult-to-bond plastic surfaces
Allow solvent to dry completely
Promptly bond with a 3M™ Scotch-Weld™ cyanoacrylate adhesive
Understanding Instant Adhesives
Instant adhesives are cyanoacrylate based formulas that are strong, fast-acting glues used in industrial and household applications. In general, they are an acrylic resin that rapidly polymerizes in the presence of moisture, forming long, strong chains, joining the bonded surfaces together.
Cyanoacrylate adhesives should be applied thinly, with pressure put on the bond for a few seconds, to ensure that the reaction proceeds rapidly and a strong bond is formed within a reasonable time.
3M instant adhesives apply right from the container and rapidly reach handling strength at room temperature. Commonly referred to as a super hold glue, a single drop per square inch can bond many plastics, rubbers, metals, wood and more. An instant adhesive from 3M set a Guinness World Record in 2012 for the strongest glue by lifting an 8.1 metric ton forklift in the air for one hour.
Bringing Better Ideas to the Surface through Science and Innovation
In the 3M Industrial Adhesives and Tapes Division, they apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, their technologies help customers like you deliver competitive products to the market faster and more efficiently. Add to cart
3M™ Scotch-Weld™ Instant Adhesive Primer AC77 is designed for difficult-to-bond, low surface energy plastics such as polypropylene, polyethylene, and PTFE. This primer should be applied to each low surface energy substrate surface to achieve desired results.
Recommended Applications
Improves adhesion of cyanoacrylate adhesives to:
Difficult-to-bond rigid plastic
Polyethylene (PE)
Polypropylene (PP)
Acetal
PTFE
TPO
3M™ Scotch-Weld™ Instant Adhesive Primer AC77 is a low surface energy instant adhesive primer. Note: This product should be tested on substrates before use since its overspray or excess may attack certain substrates (especially some plastics) causing unsightly effects. Surface preparation and application are straightforward and can be completed as follows:
Apply primer to all difficult-to-bond plastic surfaces
Allow solvent to dry completely
Promptly bond with a 3M™ Scotch-Weld™ cyanoacrylate adhesive
Understanding Instant Adhesives
Instant adhesives are cyanoacrylate based formulas that are strong, fast-acting glues used in industrial and household applications. In general, they are an acrylic resin that rapidly polymerizes in the presence of moisture, forming long, strong chains, joining the bonded surfaces together.
Cyanoacrylate adhesives should be applied thinly, with pressure put on the bond for a few seconds, to ensure that the reaction proceeds rapidly and a strong bond is formed within a reasonable time.
3M instant adhesives apply right from the container and rapidly reach handling strength at room temperature. Commonly referred to as a super hold glue, a single drop per square inch can bond many plastics, rubbers, metals, wood and more. An instant adhesive from 3M set a Guinness World Record in 2012 for the strongest glue by lifting an 8.1 metric ton forklift in the air for one hour.
Bringing Better Ideas to the Surface through Science and Innovation
In the 3M Industrial Adhesives and Tapes Division, they apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, their technologies help customers like you deliver competitive products to the market faster and more efficiently. Add to cart