3M™ PPS™ Lid & Liner Dispenser: Mini & Micro, 16298, 1 per case

The 3M™ PPS™ Lid & Liner Dispenser is a convenient way to access supplies such as lids and liners for use with the 3M™ PPS™ (Legacy) paint preparation system. The dispenser can hold at least 50 units of either lids or liners, and workers can easily release just one at a time. These dispensers are wall mountable to keep supplies close at hand and countertops open. Supplies for the 3M™ PPS™ are kept clean, neat, organized, and free from contamination in the dispenser. When it is time to restock supplies, the top-loading access feature offers exceptional convenience.

The Lid & Liner Dispenser Part Number 16299 can be used for Large, Standard, and Midi size PPS™ Liners. It can also be used for Large/Standard and Midi size PPS™ Lids.

The Lid & Liner Dispenser Part Number 16298 can be used for Mini and Micro size PPS™ Lids and Liners.

The 3M™ PPS™ system eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you're ready to start spraying.

PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray, and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation - i.e. 360 degrees.

After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent.

Specifically designed PPS™ stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun. Painters have also the option to use the 3M™ Accuspray™ ONE spray gun, which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time.

Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 15%.

3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption, and reduces solvent usage by up to 70%. The goal is to help you operate with greater efficiency and spend less time on cleaning tasks (time associated with cleaning the paint reservoir and spray gun).