Welcome Guest
SKU | 7100075470 |
---|---|
Legacy SKU | 60440242349 |
UPC | 00051144828784 |
Part Number | 82878 |
3M™ Finesse-it™ Polish - Final Finish is part of a line of specially designed compounds and polishes to be used on OEM and baked refinish paints to remove sand scratches or to remove swirl marks from previously compounded areas and is designed to produce best results when used with an air or electric buffer equipped with 3M™ Finesse-it™ buffing pads.
- Removes swirl marks after compounding
- Chemically safe for clear coats
- Creates a deep, high gloss finish
- Wax and silicone free formula
- Easy clean up
Product Dimensions |
Imperial | Metric |
Weight | 9.241 LBS | |
---|---|---|
Width | 7.13 in | 18.1 cm |
Length | 11.64 in | 29.57 cm |
Height | 4-1/2 in | 11.43 cm |
Shipping Dimensions |
|
Weight | 38.55 lb |
---|---|
Length | 15.2 in |
Width | 9.9 in |
Height | 12.8 in |
Color | Gray |
---|
- Pdf Catalogs_3m indl prds accessor
- Safety Data Sheet
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
3M™ Finesse-it™ Polish - Final Finish works well for buffing automotive OEM, marine, and aerospace coatings. This material also produces superior results in top coat rubbing and other woodworking applications requiring satin, semi-gloss, and high gloss finishes. This same material can also be used in the 3M™ Finesse-it™ Trizact™ Paint Repair System for AOEM paint and clear coats. Finish results are dependent on the combination of coating type, polish, and tools used.
3M™ Finesse-it™ products are a line of specially engineered abrasives, compounds, polishes, and buffing pads to be used on OEM and baked refinish paints to remove defects, sand scratches, or swirl marks on a variety of painted surfaces. Finesse-it products are an integral part of a 3M recommended buffing system for repairing surface defects to clear coats, lacquered wood, solid surfaces, gelcoat, powder coat, industrial paint, acrylic, and glass. Add to cart
3M™ Finesse-it™ products are a line of specially engineered abrasives, compounds, polishes, and buffing pads to be used on OEM and baked refinish paints to remove defects, sand scratches, or swirl marks on a variety of painted surfaces. Finesse-it products are an integral part of a 3M recommended buffing system for repairing surface defects to clear coats, lacquered wood, solid surfaces, gelcoat, powder coat, industrial paint, acrylic, and glass. Add to cart