A smooth ride
through rough waters
through rough waters
Welcome Guest
3M™ Venture Tape™ Film Faced ASJ Tape 106FXP, White, 99 mm x 45.7 m, 12 rolls per case
$37.86 / Roll
| SKU | 7100087900 |
|---|---|
| Legacy SKU | 70006743358 |
| UPC | 00051128952009 |
| Product Number | 106FXP |
3M™ Venture Tape™ Film Faced ASJ Tape 106FXP is a flexible, next generation white polypropylene/core/scrim/foil laminate facing coated with a 3M™ proprietary adhesive specifically formulated to adhere to polypropylene facings in both cold and hot humid temperatures. This adhesive also contains mold inhibiting agents to help prevent corrosion under the insulation.
- Tough, flexible vapor seal on ductboard and pipe insulation butt joints
- Polypropylene film facing adds durability in a range of temps and environments
- Conforms well to curved or irregular surfaces
- Cold weather acrylic adhesive is formulated for polypropylene surfaces
- Easy to install on site without special tools or application methods
- Meets ASTM C1136, Type I, II, III, IV
Product Dimensions |
Imperial | Metric |
| Width | 3.89 in | 98.806 mm |
|---|---|---|
| Length | 50 yd | 45.7 m |
Shipping Dimensions |
|
| Weight | 42 lb |
|---|---|
| Length | 13.875 in |
| Width | 13.875 in |
| Height | 12.75 in |
| Color | White |
|---|
- Pdf Flyers_3m venture tape asj tap
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. 
Tough and Flexible for Duct Piping Butt Joints
3M™ Venture Tape™ Film Faced ASJ Tape 106FXP matches next generation insulation facings. It is a tri-directional reinforced tape that excels in demanding temperature and humidity applications. It is comprised of a tough white polypropylene film facing in a core/scrim/foil laminated backing coated with a cold weather acrylic adhesive. The facing is flexible and conforms to irregular surfaces and curves, excellent for butt joints. The aggressive pressure sensitive acrylic adhesive is formulated for polypropylene, and contains mold inhibiting agents to prevent mold build-up in humid and damp conditions. With excellent resistance to weathering, mold, UV and environmental conditions, this ASJ tape performs well in extremely cold and hot temperature applications.
Recommended Applications
All service jacket (ASJ) closure system on next generation duct piping butt joints
Butt joint vapor seal on ductboard and pipe insulation
Cold weather
Hot and humid conditions
Cold Weather Performance
3M™ Venture Tape™ Film Faced ASJ Tape 106FXP is coated with a proprietary, pressure sensitive, cold weather, solvent acrylic adhesive. This adhesive has been specifically designed for cold weather applications, though it performs well at normal and high temperatures as well. It delivers a quick stick at normal temperatures. With a service temperature ranging from -40°F/-40°C to 150°F/66°C, this tape can be applied in a variety of environmental conditions. It provides good holding power for extended periods with good aging properties that resist lifting and curling.
The Science of Better Adhesion from 3M
Since 1925 when a lab assistant invented masking tape, 3M has been applying science to life – developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each industrial tape and adhesive, like 3M™ Venture Tape™ Film Faced ASJ Tape 106FXP, to help businesses operate faster, better and more efficiently. Add to cart
3M™ Venture Tape™ Film Faced ASJ Tape 106FXP matches next generation insulation facings. It is a tri-directional reinforced tape that excels in demanding temperature and humidity applications. It is comprised of a tough white polypropylene film facing in a core/scrim/foil laminated backing coated with a cold weather acrylic adhesive. The facing is flexible and conforms to irregular surfaces and curves, excellent for butt joints. The aggressive pressure sensitive acrylic adhesive is formulated for polypropylene, and contains mold inhibiting agents to prevent mold build-up in humid and damp conditions. With excellent resistance to weathering, mold, UV and environmental conditions, this ASJ tape performs well in extremely cold and hot temperature applications.
Recommended Applications
All service jacket (ASJ) closure system on next generation duct piping butt joints
Butt joint vapor seal on ductboard and pipe insulation
Cold weather
Hot and humid conditions
Cold Weather Performance
3M™ Venture Tape™ Film Faced ASJ Tape 106FXP is coated with a proprietary, pressure sensitive, cold weather, solvent acrylic adhesive. This adhesive has been specifically designed for cold weather applications, though it performs well at normal and high temperatures as well. It delivers a quick stick at normal temperatures. With a service temperature ranging from -40°F/-40°C to 150°F/66°C, this tape can be applied in a variety of environmental conditions. It provides good holding power for extended periods with good aging properties that resist lifting and curling.
The Science of Better Adhesion from 3M
Since 1925 when a lab assistant invented masking tape, 3M has been applying science to life – developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each industrial tape and adhesive, like 3M™ Venture Tape™ Film Faced ASJ Tape 106FXP, to help businesses operate faster, better and more efficiently. Add to cart
