Choose 3M™ Scotch-Weld™ EPX Mixing Nozzles for efficient application of 3M™ Scotch-Weld™ Structural Adhesives in Duo-Pak (DP) cartridges. Each nozzle provides thorough mixing and precise placement of two part adhesives and potting compounds.
- Provides thorough mixing and precise placement of two-component structural adhesives
- Tapered tip can be cut for bead size
- Available in a variety of designs to fit all cartridge sizes
- Minimize adhesive waste; easy to replace with new nozzle to use remaining adhesive in a cartridge
- Used nozzle can be left on cartridge to provide a good seal until ready to continue dispensing
What is 3M™ Scotch-Weld™ EPX Mixing Nozzle?
The 3M™ Scotch-Weld™ EPX Mixing Nozzle is a square green nozzle used for mixing and dispensing dual component adhesives such as epoxies, acrylics, and urethanes.
What are the ratios available for this mixing nozzle?
This particular mixing nozzle has both 1:1 and 2:1 ratios available to accommodate different adhesive formulations.
How much adhesive can one mixing nozzle dispense?
Each individual mixing nozzle has an effective volume of either 48.5mL or 50mL depending on its ratio size.
How many nozzles are included in each case of the product?
Each case includes a total of 36 separate nozzles per package.
Can these nozzles be used with any other brand's adhesives besides those made by Three M?
:This specific mixing nozzle from Three M works best when used specifically with their own lines of two-part chemicals. Still, if it suits your needs it could likely mix most low-viscosity liquid systems like two bio-components (such as silicone) which require sufficient power to get high-quality results regardless of brand.
Provides Thorough Mixing and Precise Placement
3M™ Scotch-Weld™ EPX Mixing Nozzles are designed to meet exact requirements for easy and uniform application. These accessories are approved by 3M and work with 3M Duo-Pak cartridges to simultaneously meter, mix, and apply two-part adhesives and potting compounds. The tapered tips can be cut for precise bead size.
- Attach to 3M Duo-Pak structural adhesive cartridges
- Dispense with 3M EPX Manual or pneumatic applicators
Minimizes Adhesive Waste
Any leftover adhesive can be stored with the used nozzle in place to provide a good seal. When ready, replace it with a new nozzle to continue using the remaining adhesive in the cartridge.
Choose original 3M accessories to ensure the accurate performance of 3M™ Scotch-Weld™ EPX Applicators for the ideal system for assembly, maintenance, and in-field service.
Bringing Better Ideas to the Surface through Science and Innovation
The 3M Industrial Adhesives and Tapes Division applies the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. Ultimately, these technologies help customers deliver competitive products to the market faster and more efficiently.