A smooth ride
through rough waters
through rough waters
Welcome Guest
3M™ Cubitron™ II Depressed Center Grinding Wheel, 87206, T27, 7 in x 1/4 in x 7/8 in, Trial Pack, 10 ea/Case
$18.41 / Pack
| SKU | 7100119216 |
|---|---|
| Legacy SKU | 60440315061 |
| UPC | 00051125872065 |
| Part Number | 87206 |
3M™ Cubitron™ II Grinding Wheel is constructed of 3M precision-shaped ceramic grain to bring you an exceptionally fast-cutting and long-lasting rigid bonded wheel for heavy weld removal and other heavy-duty grinding applications. This grinding wheel works well on almost all materials and is specially formulated for use on stainless steel, mild steel, and aerospace alloys.
- 3M Precision-shaped grain engineered to cut faster than competitive ceramic products, offering significant productivity gains
- Triangular shaped ceramic grain wears evenly, runs cool, and optimizes mineral breakdown, for extra-long life
- Reduces changeouts and downtime in robotic and pressure-assisted applications
- Rigid, reinforced resin-bonded wheel slices through almost all materials including stainless steel, mild steel, and aerospace alloys
- Wheel must have a maximum operating speed greater than or equal to the maximum speed of the power tool used
- Must be used with ANSI-approved guard that fits the size of the wheel
Product Dimensions |
Imperial | Metric |
| Weight | 1.072 LBS | |
|---|---|---|
| Diameter | 7 in | 177.8 mm |
| Thickness | 1/4 in | 6.35 mm |
Shipping Dimensions |
|
| Weight | 11.411 lb |
|---|---|
| Length | 10.375 in |
| Width | 10.375 in |
| Height | 10.75 in |
| Color | Black |
|---|---|
| Maximum Speed | 80 none |
| Grit | 36 |
- Pdf Brochures_3m abrasives for rig
- Safety Data Sheet
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. 
Cuts Fast and Cool
3M™ Cubitron™ II Depressed Center Grinding Wheel is built to perform at a level that surpasses competitive wheels in both cut and life to deliver significant gains in productivity. Experience the power of 3M Precision-Shaped Grain to provide a cool, extra-sharp, quick cut long after other wheels are consumed.
Ideal for Robotic Weld Grinding
In medium and high-pressure applications like robotic weld grinding, it's important to choose a high-performance abrasive that cuts fast and lasts long. The self-fracturing mineral in 3M™ Cubitron™ II Depressed Center Grinding Wheel will keep your robot grinding welds long after other abrasives call it quits, reducing downtime and maximizing efficiency.
Grinding Wheel: Tips for Optimum Use
A grinding wheel is a rigid resin-bonded wheel that is approximately 1/4" thick and is useful for removing welds from internal angles. Fiber discs, on the other hand, typically work best for grinding welds on flat surfaces. A grinding wheel must be run on a right angle grinder with a wheel guard that is designed specifically for the size of wheel used. Type 27 wheels have a depressed center to allow grinding at any angle without damaging the surrounding surface with the attachment. The grinding wheel must have a maximum operating speed greater than or equal to the maximum speed of the grinder used.
3M Precision-Shaped Grain Maximizes Cutting Potential
3M™ Cubitron™ II products have raised the bar for high-performing abrasives. 3M engineers started with 3M™ ceramic abrasive grain and used proprietary precision-shaped grain technology to maximize cutting potential. Precision-shaped grain continually fractures into super-sharp points and edges that slice cleanly through metal like a knife, rather than plowing as traditional abrasives do, ensuring extended high performance in heavy-duty production applications. The grains wear evenly and provide extra-long life and consistency with less grinding pressure. 3M™ Cubitron™ II abrasives outcut and outlast competitive ceramic abrasives, maximizing productivity and minimizing operator fatigue. Add to cart
3M™ Cubitron™ II Depressed Center Grinding Wheel is built to perform at a level that surpasses competitive wheels in both cut and life to deliver significant gains in productivity. Experience the power of 3M Precision-Shaped Grain to provide a cool, extra-sharp, quick cut long after other wheels are consumed.
Ideal for Robotic Weld Grinding
In medium and high-pressure applications like robotic weld grinding, it's important to choose a high-performance abrasive that cuts fast and lasts long. The self-fracturing mineral in 3M™ Cubitron™ II Depressed Center Grinding Wheel will keep your robot grinding welds long after other abrasives call it quits, reducing downtime and maximizing efficiency.
Grinding Wheel: Tips for Optimum Use
A grinding wheel is a rigid resin-bonded wheel that is approximately 1/4" thick and is useful for removing welds from internal angles. Fiber discs, on the other hand, typically work best for grinding welds on flat surfaces. A grinding wheel must be run on a right angle grinder with a wheel guard that is designed specifically for the size of wheel used. Type 27 wheels have a depressed center to allow grinding at any angle without damaging the surrounding surface with the attachment. The grinding wheel must have a maximum operating speed greater than or equal to the maximum speed of the grinder used.
3M Precision-Shaped Grain Maximizes Cutting Potential
3M™ Cubitron™ II products have raised the bar for high-performing abrasives. 3M engineers started with 3M™ ceramic abrasive grain and used proprietary precision-shaped grain technology to maximize cutting potential. Precision-shaped grain continually fractures into super-sharp points and edges that slice cleanly through metal like a knife, rather than plowing as traditional abrasives do, ensuring extended high performance in heavy-duty production applications. The grains wear evenly and provide extra-long life and consistency with less grinding pressure. 3M™ Cubitron™ II abrasives outcut and outlast competitive ceramic abrasives, maximizing productivity and minimizing operator fatigue. Add to cart