Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
SKU 7100138162
Legacy SKU 60440262412
UPC 00051144806515
Product Number 747D

3M Flap Wheel 747D was designed for light grinding, blending, deburring, and polishing on a variety of metals. Ceramic abrasive covered flaps conform to the work piece and provide a smooth clean finish.

  • Ceramic aluminum oxide blend offers excellent cut rate and life for better performance
  • X-weight cotton backing withstands aggressive sanding and grinding
  • Resin bonding resists thermal and chemical deterioration for extended wheel life
  • Abrasive flap design provides a soft and smooth cut on rounded or irregular surfaces
  • Includes a grind-aid to provide cooler running on stainless-steel and other metals
  Add to cart
On it's way to you April 8   

Qty

Minimum Order 10 Items
Order Increment 10 Items
  Immense Durability
  Easy To Use
  Global Shipping
  Lowest Price Per Item
Product Dimensions
Imperial Metric
Weight 2.85 lb
Width 1 in 25.4 mm
Diameter 3 in 76.2 mm
Center Hole Diameter 1/4 in 6.35 mm
Shipping Dimensions
Weight 2.764 lb
Length 5.7 in
Width 5.7 in
Height 5.8 in
Color Orange
Grit 80

PRODUCT FAQ

  1. What is the 3M™ Flap Wheel 747D made of?

    The 3M™ Flap Wheel 747D is made with a blend of ceramic abrasive grain and aluminum oxide abrasives.

  2. What are the dimensions of each flap wheel?

    The flap wheels measure at 3 inches (diameter) x 1 inch (width) x 1/4 inch (center hole).

  3. How many pieces are included in a single order or case?

    Each case of the 3M™ Flap Wheel contains ten pieces.

  4. For what applications can I use the type-83 design on this flap wheel?

    The type-83 design on this product makes it ideal for grinding, blending and finishing flat sheet metal surfaces.

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
Mixed Ceramic Abrasive

The 3M™ Flap Wheel 747D is a high-performance abrasive wheel that features a ceramic abrasive mix on each flap. This mix was created using a proprietary process that enhances the toughness and hardness of the grain. The ceramic abrasive mix is a blend of aluminum oxide and 3M ceramic grain, which creates a harder and longer-lasting abrasive. Ceramic abrasives are designed to cut fast and handle intense heat and stress applications, making them perfect for light to moderate stock removal.

The ceramic/aluminum oxide blend in this flap wheel surpasses aluminum oxide abrasives in cut-rate and durability, making it an excellent choice for moderate stock removal and surface preparation.

High Quality Construction

The abrasive mix is attached to a flexible cotton backing using a resin bond. This resin bonding material is specially designed to resist thermal and chemical deterioration that can occur during high-speed sanding. The bond is very hard, allowing for faster cuts and a higher cut rate. This wheel also includes a grinding aid for cooler running on stainless steel.

Each flap uses an X-weight cotton backing, which provides a tough but flexible surface that bends to fit any workpiece. As the wheel is used, the self-cutting flaps wear away to expose sharp, new abrasive material, ensuring that surfaces are sanded consistently throughout the life of the wheel.

Flap Wheel Advantages

Coated abrasive flap wheels are the ideal choice for light grinding, blending, graining, and scale removal on a variety of metals. The abrasive flaps offer a long-lasting supply of fresh abrasives and a load-resistant design. 3M™ flap wheels are available in both flange-mounted and spindle-mounted constructions with general-purpose aluminum oxide or high-performing 3M ceramic aluminum oxide blend abrasive grain.

  • Long-lasting supply of fresh abrasives
  • Load-resistant design
  • Available in flange-mounted and spindle-mounted constructions
  • General-purpose aluminum oxide or high-performing 3M ceramic aluminum oxide blend abrasive grain
Applications
Industries
Brochures, Catalogs & Data Sheets
Other Products in this Family

Lead times are estimates and may vary based on our suppliers' product availability.