3M™ Flap Wheel 747D, P120 X-weight, Type 83, 2 in x 1 in x 1/4 in, 10 ea/Case

$12.04 / Each

SKU	7100138313
Legacy SKU	60440262396
UPC	00051144807550
Product Number	747D

3M Flap Wheel 747D was designed for light grinding, blending, deburring, and polishing on a variety of metals. Ceramic abrasive covered flaps conform to the work piece and provide a smooth clean finish.

Ceramic aluminum oxide blend offers excellent cut rate and life for better performance
X-weight cotton backing withstands aggressive sanding and grinding
Resin bonding resists thermal and chemical deterioration for extended wheel life
Abrasive flap design provides a soft and smooth cut on rounded or irregular surfaces
Includes a grind-aid to provide cooler running on stainless-steel and other metals

Add to cart

Immense Durability

Easy To Use

Global Shipping

Lowest Price Per Item

Product Dimensions	Imperial	Metric
Weight	0 NULL
Width	0 null
Length	0 null
Height	0 null
Center Hole Diameter	1/4 in	6.35 mm

Shipping Dimensions
Weight	1.43102 lb
Length	7.12598 in
Width	5.11811 in
Height	5 in

PRODUCT FAQ

What is the 3M™ Flap Wheel 747D, Type 83?

The flap wheel is an abrasive grinding tool that consists of interleaved flaps attached to a central hub.
What are the dimensions and grit size of this particular flap wheel?

These wheels measure at 2 inches by 1 inch with a quarter-inch shank. They have X-weight paper backing and are made using P120 grit, which is finer than sandpaper.
Can these be used on any material?

Yes! These wheels can effectively hone stainless steel, titanium, carbon steel, aluminum alloys and cobalt chrome among other materials.
How many units come in one case?

Each case comes has ten units inside them.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

UPC 00051144807550 | 3M™ Flap Wheel 747D

Mixed Ceramic Abrasive

The 3M™ Flap Wheel 747D is a high-performance abrasive wheel that features a ceramic abrasive mix on each flap. This mix was created using a proprietary process that enhances the toughness and hardness of the grain. The ceramic abrasive mix is a blend of aluminum oxide and 3M ceramic grain, making it a harder and longer-lasting abrasive. It is perfect for light to moderate stock removal and can handle intense heat and stress applications. The ceramic/aluminum oxide blend surpasses aluminum oxide abrasives in cut-rate and durability, making it an excellent choice for moderate stock removal and surface preparation.

High Quality Construction

The abrasive mix is attached to a flexible cotton backing using a resin bond that resists thermal and chemical deterioration during high-speed sanding. The bond is very hard, allowing for faster cuts and a higher cut rate. The wheel also includes a grinding aid for cooler running on stainless steel. Each flap uses an X-weight cotton backing, which provides a tough but flexible surface that bends to fit any workpiece. As the wheel is used, the self-cutting flaps wear away to expose sharp, new abrasive material, ensuring that surfaces are sanded consistently throughout the life of the wheel.

Flap Wheel Advantages

Coated abrasive flap wheels are the ideal choice for light grinding, blending, graining, and scale removal on a variety of metals. The abrasive flaps offer a long-lasting supply of fresh abrasives and a load-resistant design. 3M™ flap wheels are available in both flange-mounted and spindle-mounted constructions with general-purpose aluminum oxide or high-performing 3M ceramic aluminum oxide blend abrasive grain.

Benefits of 3M™ Flap Wheel 747D: