3M™ Cloth RX Unslashed Segment 341D, 3 in x 12 in, P120 X-weight, 20 ea/Case

$32.98 / Each

SKU	7100175452
Legacy SKU	60440348278
UPC	00638060050965
Product Number	341D

Featuring premium grade aluminum oxide on sturdy cotton backing, the 3M™ Cloth Segment 341D is ideal for sanding the outside diameter of cylinders, to remove rough areas and set a grain finish on many different types of metal surfaces. Primarily used for setting the grain on contoured metal parts, it is commonly used to finish large pieces such as carbon steel pipes and stainless steel tanks.

Custom segments offer conformability for rotary sanding on radiuses and contours
Coated abrasive flaps perform light stock removal, deburring, finishing and blending, and setting a grain finish
Heavyweight cotton cloth provides durability for high-production applications
Premium grade aluminum oxide delivers a fast cut
Plastic base slides easily into a 3M™ RX Aluminum Hub (sold separately) with a teardrop designed slot
Heat-resistant resin coating bonds abrasive to backing for durability under pressure and heat

Immense Durability

High Performance

Global Shipping

Industry Low Price

Product Dimensions	Imperial	Metric
Width	12 in	304.8 mm
Length	3 in	76.2 mm

Shipping Dimensions
Weight	17.31 lb
Length	14 in
Width	14 in
Height	4.813 in

Maximum RPM	2,200
Grit	P120

Pdf Safety Inserts_3m radial segme
Safety Data Sheet

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

Reliable Construction for Contour Sanding
3M™ Cloth Segment 341D is constructed of a number of layers of coated abrasive cloth. These layers are held together on one end by a sturdy plastic assembly or base that slides easily into the teardrop-shaped slots of a 3M™ RX Hub (sold separately). As the hub rotates over the substrate, the abrasive delivers a linear grain finish. Segments offer more conformability over a comparable belt, making them more suitable for a range of contours and radiused areas of a workpiece. Additionally, segments wear more slowly than belts due to the layered abrasive.

Cloth-backed abrasives are known for their durability and flexibility and are a good choice for stock removal. 3M manufactures cloth segments of two types: slashed and unslashed. Slashed segments are cut into vertical strips that offer more conformability to inner contours. Unslashed segments are used when less conformability when a more aggressive product is required.

Multi-Use Construction
Aluminum oxide mineral is a popular choice among industrial professionals because of its cut-rate, durability, and long life. It can be used on a wide variety of materials in both woodworking and metalworking, including ferrous alloys, and is the most commonly used industrial abrasive. The closed coat construction of 3M™ Cloth Segment 341D material delivers a consistent finish, making it a good choice for setting a grain pattern. Designed as a hardworking abrasive, 3M™ Cloth Segment 341D is manufactured with heat-resistant resin, a strong binding agent that adheres the abrasive to the backing and maintains the stability of the bond even in conditions of high heat or pressure. This also allows for faster sanding and a higher cut rate.

Ease of Use
The 3M™ RX Hub is an aluminum wheel with evenly spaced slots around the perimeter, into which the segments are inserted. These segments will also fit the keyhole shaped slots of hubs by other manufacturers. To hold the segments in place during operation, appropriately sized stamped metal flanges must be used on both sides of the hub to hold the segments in place when mounted on a spindle.

3M Engineered for Industrial Production
For more than 100 years 3M has been a leading abrasive supplier for the metalworking and woodworking industries, and offers a complete line of high quality metalworking abrasive solutions to meet your tough jobs. 3M™ Cloth Segment 341D is custom-sized for every customer to help you achieve the best possible results for your application. It is yet another example of how 3M provides effective solutions to help businesses like yours operate faster, better and more efficiently. Add to cart