A smooth ride
through rough waters
through rough waters
Welcome Guest
3M™ Rocker Protector Pouch, 08734, 5.5 fl oz, 4 per case
$23.21 / Each
| SKU | 7100188908 |
|---|---|
| Legacy SKU | 60455102800 |
| UPC | 00051135087343 |
| Part Number | 08734 |
3M™ Rocker Protector Pouch is a resilient under-the-paint protective coating designed to help protect rocker panels and stone-throw areas of automobiles.The specially-engineered formula matches a wide variety of textures on factory-applied coatings. Use this pouch with 3M™ Accuspray™ Spray Gun Kit HGP (sold separately) to access hard-to-reach areas and ensure uniform application.
- Specially-engineered 3M™ Rocker Protector Pouch contains high-performing solution designed to protect rocker panels from rust and corrosion
- Use with 3M™ Accuspray™ Spray Gun Kit HGP (sold separately) for quick, clean coating application
- Available in job-ready 3 fl. oz or 5.5. fl. oz. pouches to help minimize waste and cleanup time
- Spray gun and pouch may be sprayed at any angle to access hard-to-reach areas
- Adjustable fluid and fan controls on spray gun enable operators to achieve desired textures
Product Dimensions |
Imperial | Metric |
| Weight | 0.474 LBS |
|---|
Shipping Dimensions |
|
| Weight | 2.18 lb |
|---|---|
| Length | 8.187 in |
| Width | 7.312 in |
| Height | 6.25 in |
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. 
Protect Rocker Panels: Fighting Rust and Corrosion
As operators know, rocker panels help protect the structural integrity of vehicles. It's important to apply a protective coating to rocker panels prior to painting to prevent corrosion and rust later on. Temperature, humidity and debris can all add up — generating unwanted rust. The 3M™ Rocker Protector Pouch was designed to fight rust and corrosion.
Achieve a Perfect Texture
A few challenges that come with protecting rocker panels include achieving the right texture and accessing hard-to-reach areas. 3M™ Rocker Protector Pouch is designed for use with the 3M™ Accuspray™ Spray Gun Kit HGP(sold separately). The solution comes in a convenient ready-to-use pouch, either 3 fl. oz or 5.5 fl. oz, which attaches to the nozzle of the spray gun. Having the solution available in a job-ready pack helps minimize waste and reduce the cleanup required post application.
3M™ Accuspray™ HGP Spray Gun Kit quickly delivers coatings onto any rigid textured panels on the vehicle. The precision delivery of these coatings allows product to be sprayed at any angle to match OEM textured finishes. Because the spray gun is so accurate, less masking is required and overspray is reduced, practically eliminating solvent use needed for clean up. The fan and fluid controls on the spray gun can be adjusted, so operators can tailor the texture and appearance to their preferences. 3M recommends experimenting on a test panel prior applying the undercoating to determine accurate gun settings. Altogether, this complete system of 3M™ Rocker Protector Pouch and spray gun was engineered to make this tough but critical job easy, swift and efficient for operators. Add to cart
As operators know, rocker panels help protect the structural integrity of vehicles. It's important to apply a protective coating to rocker panels prior to painting to prevent corrosion and rust later on. Temperature, humidity and debris can all add up — generating unwanted rust. The 3M™ Rocker Protector Pouch was designed to fight rust and corrosion.
Achieve a Perfect Texture
A few challenges that come with protecting rocker panels include achieving the right texture and accessing hard-to-reach areas. 3M™ Rocker Protector Pouch is designed for use with the 3M™ Accuspray™ Spray Gun Kit HGP(sold separately). The solution comes in a convenient ready-to-use pouch, either 3 fl. oz or 5.5 fl. oz, which attaches to the nozzle of the spray gun. Having the solution available in a job-ready pack helps minimize waste and reduce the cleanup required post application.
3M™ Accuspray™ HGP Spray Gun Kit quickly delivers coatings onto any rigid textured panels on the vehicle. The precision delivery of these coatings allows product to be sprayed at any angle to match OEM textured finishes. Because the spray gun is so accurate, less masking is required and overspray is reduced, practically eliminating solvent use needed for clean up. The fan and fluid controls on the spray gun can be adjusted, so operators can tailor the texture and appearance to their preferences. 3M recommends experimenting on a test panel prior applying the undercoating to determine accurate gun settings. Altogether, this complete system of 3M™ Rocker Protector Pouch and spray gun was engineered to make this tough but critical job easy, swift and efficient for operators. Add to cart