Scotch-Brite™ Clean and Finish Discs combine conformable material and abrasive mineral to effectively blend, clean, and polish surfaces on a wide variety materials such as aluminum, stainless steel, plastics, wood, and fiberglass; producing a clean, consistent finish without undercutting or damaging the base material.
- Soft abrasive mineral and non-woven web are ideal for cleaning, blending, finishing, and light coating and corrosion removal
- Conformable pad gets into corners and over contoured surfaces to produce a uniform finish\Open web construction resists loading and rinses clean for repeated use
- Non-woven 3D structure provides long life and consistent finishes
- Attaches to random orbital sander (hookit backup pad) for increased cut-rate and cover larger areas
|Diameter||7-7/8 in||200.025 mm|
What is the Scotch-Brite Clean and Finish Disc made of?
The Scotch-Brite Clean and Finish Disc is a non-woven abrasive disc that is made up of nylon fibers, resin, and abrasive grain.
Can the 7-7/8 in x 2-4/5 in disc be used on different surfaces?
Yes! This disc can be effectively used on variety of substrates like metals,, composites or wood. Ideally it works best for scratches , corrosion or light weld blending upto class 1 finishes.
Is this product sold individually or as a set?
It comes as a pack of fifty individual discs per case.
Does this clean and finish disc require any lubricant when using it to remove imperfections from metal surfaces?
No, you do not need to use any additional lubricants with the Scotch-Brite Clean and Finish Disc. The non-woven material will effectively remove surface imperfections without requiring lubrication.
.How does A FIN grade differ than other grades available for scotch brite finishing products ?
.A FIN grade offers smoothest blend among all grades ideal fpr cosmetic finishes where defination matters.FIner grits tend to leave finer lazer marks whereas coarser ones are good at removing bigger imprefections . When specifically asked in some situations users have also found applications for B , VFN (Very Fine) & SFN grade however A fin being our most popular selection amongst all these.
Scotch-Brite™ Clean and Finish Disc gets into hard-to-reach areas and also works well for finishing, paint preparation, surface blending, and scuffing applications. It is also effective for contour finishing and lacquer sanding. These discs are flexible, making them effective for getting into hard-to-reach areas and producing uniform finishes. The abrasive mineral effectively blends, finishes, and polishes metals, composites, and advanced surfaces. It is an effective abrasive tool for paint prep, scuffing, and light corrosion removal. The disc runs cool and resists loading to continuously provide consistent conditioning properties throughout the life of the product.
Scotch-Brite™ Clean and Finish Discs are manufactured with different types of abrasive minerals such as silicon carbide, aluminum oxide, or talc. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish. Talc is a mild abrasive that can be used to achieve a satin finish or with polish to create a high gloss finish in topcoat rubbing applications.
Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.