SKU | 7100203883 |
---|---|
Legacy SKU | 60455101786 |
UPC | 00051135088012 |
Catalog Number | 08801 |
Product Number | 8801 |
3M No Cleanup Applicator Gun is a high-performance applicator gun designed for use with 3M No Cleanup products (sold separately). This unique siphon-feed applicator gun offers a convenient and inexpensive means for spraying low-viscosity solutions contained within the Cleanup cans.
- High-performance applicator gun for use with 3M™ No Cleanup coatings
- Unique assembly requires no post-application cleanup
- Use with disposable No Cleanup Replacement Nozzles (sold separately)
- Pneumatically-powered gun accommodates different air pressures to achieve desired coating texture
- Sleek, lightweight design for greater ease of use and operator comfort
Product Dimensions |
Imperial | Metric |
Weight | 0.843 lbs | |
---|---|---|
Width | 1.56299 in | |
Length | 4-1/2 in | |
Height | 7.1252 in |
Shipping Dimensions |
|
Weight | 7.27525 lb |
---|---|
Length | 12.99213 in |
Width | 7.3622 in |
Height | 5.23622 in |
Color | Black |
---|
PRODUCT FAQ
-
What is the 3M™ No Cleanup Applicator Gun, 08801?
It is a disposable adhesive applicator gun that simplifies and speeds up the application of a wide range of one-part sealants, adhesives, and other materials.
-
How does it work?
The 3M™ No Cleanup Applicator Gun works through its innovative design that eliminates clean-up time by applying pressure on the adhesive tube. It also controls flow compared to traditional caulking guns resulting in less waste.
-
What types of materials can I use with this applicator gun?
You can use it with almost all standard industrial cartridges containing one-component sealers and adhesives such as acrylics, silicones, polyurethanes among others
-
Can I purchase the product individually or only per case?
You could get both options - you could buy them per piece or buy an entire box which contains eight units to maximize savings.
-
. Is there any limit to how much material I can dispense using this tool?
A : Not using too high-viscosity products , flow rate adjustments are made by wire cutters at the end where different cuts provide different rates but generally concentrate between12-30psi.
The 3M™ No Cleanup Applicator Gun is a part of a system of products that are designed to protect and bolster automotive coatings. This applicator gun helps operators achieve clean and uniform coatings on their panels. The best part is that the 3M™ No Cleanup Applicator Gun requires no cleaning after use.
Champion the MessThe No Cleanup Replacement Nozzle (sold separately) is inserted into the Cleanup Can (sold separately) and fits directly onto the gun. The nozzle is disposable and can be discarded after use. Older coating systems required the coating to run through the gun, which meant operators had to disassemble the gun and thoroughly clean it. Now, the need for additional cleanup is eliminated because the coating is transmitted through the nozzle.
Coatings recommended for use with this applicator gun include:
- 3M™ No Cleanup Rocker Gard™ Coating
- 3M™ No Cleanup Waterbased Undercoating
- 3M™ No Cleanup High Coverage Body Schutz™ Coating
To use the applicator gun, operators begin by inserting a nozzle into the No Cleanup Can and pressing down until it snaps securely into place. Then, the nozzle attaches to the applicator gun. When attaching the air hose to the gun, please follow the directions and guidelines that accompany the can. Modifying the pressure can change the texture and appearance of the coating. In fact, it's often a good idea to spray a small test panel and adjust the variables – air pressure, panel distance, and coats – to figure out how to achieve the desired texture.
Overall, the 3M™ No Cleanup Applicator Gun is a unique siphon-feed applicator that requires no-post application cleaning. Spraying corrosion protection coatings on vehicles is critical; it helps protect surfaces from the environment. The applicator gun was designed so you can achieve a level of high-quality protection – and not stress and mess.