Bondo® Body Repair Kit Clip Strip BRKIT-2PK-CS

The Bondo Body Repair Kit is a comprehensive solution for making same day repairs to dents, rust holes up to 3 inches, scratches, and more on vehicle bodies and panels. This kit includes step-by-step instructions and all the necessary materials for a hassle-free application process.

The kit contains two ready-mix pouches: Bondo Original and Bondo Fiberglass. These pre-measured packets ensure accurate proportions for optimal results. The Bondo Original pouch is specially formulated to be non-shrinking, providing a seamless and durable finish for your repairs.

In addition to the ready-mix pouches, the kit also includes a self-adhesive body patch and a spreader. The self-adhesive body patch is used to cover holes or rust out areas larger than in diameter. It can be easily cut to size as needed. The spreader is used to apply the filler materials onto the repair area.

The Bondo Fiberglass filler pouch is used first in the repair process. The hardener and filler pouches are separated by tearing down the perforation line. The filler pouch is then kneaded to ensure the components are ready for use. The contents of the filler pouch are pushed onto a non-porous mixing surface using the spreading tool. The hardener pouch is also torn open and its contents are mixed with the filler components to achieve a uniform color. The working time for the mixed product is 3-4 minutes. An initial thin layer of the mixed fiberglass filler is spread over the repair area using firm pressure. Additional layers can be applied as needed. The fiberglass filler is allowed to cure for 30 minutes.

After rough shaping the fiberglass filler with 80 grit sandpaper, the Bondo Original Filler pouch is used for the topcoat. The same mixing process is followed, and the Bondo Original Filler is applied over the area repaired with the fiberglass filler. This topcoat is allowed to cure for 20 minutes.

Once the filler has cured, it can be further shaped and finished using 80 grit sandpaper and 180 grit or finer sandpaper. The repair area is featheredged for a seamless blend. After waiting 45 minutes, 2-3 coats of primer are applied to cover the repair area. Any small imperfections can be filled with Bondo Glazing and Spot Putty, followed by another round of priming and final finishing according to the paint manufacturer's recommendation.

For best results, it is recommended to apply the Bondo Body Repair Kit at temperatures of 45F (7C) or above. After use, tools can be cleaned with acetone or lacquer thinner. If you have any questions or need assistance, please contact our help line at 1-800-494-3552.