3M™ Flexible Diamond Hand Lap 6200J is a versatile hand-held abrasive that optimizes the sharp cutting action of diamond mineral to grind and finish many materials, including chilled iron, granite, carbide, composites, non-ferrous metals, thermal spray coatings and exotic alloys.
- Ideal for finishing, polishing, blending and deburring
- Available in a range of grades tailored to meet different project needs
- Portable abrasive makes finishing in hard-to-reach areas achievable
- Contoured, hand-held foam backing ergonomically designed for better comfort
- Open dot diamond pattern permits debris and swarf to escape, so mineral keeps cutting fast and sharp
What is the 3M™ Flexible Diamond Hand Lap used for?
The Flexible Diamond Hand Lap is designed to enable hand polishing materials such as ceramics, glass and metals.
Can I use it for both wet and dry applications?
Yes! You can use this diamond hand lap for both wet or dry applications to accommodate your needs.
Is it easy to hold and work with?
Absolutely. Its flexible nature allows that you contour the disk effectively, while its size ensures that it’s maneuverable enough during usage.
Will one be all I need, or how many pieces should I get in a case?
. We offer these pieces in cases of 10 pieces each so you are covered moving forward for some time depending on your application frequency
. Does it require any special maintenance after usage?
. After each usage session of the 3M™ Flexible Diamond Hand Lap, simply wash with water until clean (rinse thoroughly), shake eliminating excess water droplets then allow drying at room temperature before storing
3M™ Flexible Diamond Hand Lap 6200J is ideal for finishing applications that require aggressive sanding, such as highlighting body-in-white automotive defects. The diamond mineral cuts fast and sharp, which minimizes the level of manual pressure needed to get the job done.Comfortable Hand-Held Design
3M™ Flexible Diamond Hand Lap 6200J was ergonomically designed to enhance operator comfort. The contoured foam backing assists with grip, so an even level of pressure may be applied over the surface area. Additionally, because Diamond Hand Lap 6200J is hand-held it can easily get into those stubborn, hard-to-reach areas.Benefits of an Open Dot Pattern
The diamond mineral on 3M™ Flexible Diamond Hand Lap 6200J is adhered to a premium flexible backing in an open dot pattern. The open dot pattern allows swarf to escape, so debris will not clog the mineral. This helps sustain a sharp cut and prolong abrasive service life. The premium flexible backing conforms to the substrate and responds to surface irregularities, so you can finish contoured surfaces. 3M™ Flexible Diamond Hand Lap 6200J comes in a variety of grades tailored to meet specific project needs. Metal bond grades are available in 250, 125, 74, 40, 20 and 10 microns. Bigger microns signal bigger minerals, so these grades are good for heavy, fast stock removal. Smaller grades are best for fine finishing.Overall
3M™ Flexible Diamond Hand Lap 6200J is a versatile tool that can be used for a variety of applications in any workshop. Its comfortable hand-held design and open dot pattern make it easy to use and maintain, while its range of grades ensures that it can be tailored to meet specific project needs.