3M™ Flexible Diamond Hand Lap 6200J is a versatile hand-held abrasive that optimizes the sharp cutting action of diamond mineral to grind and finish many materials, including chilled iron, granite, carbide, composites, non-ferrous metals, thermal spray coatings and exotic alloys.
- Ideal for finishing, polishing, blending and deburring
- Available in a range of grades tailored to meet different project needs
- Portable abrasive makes finishing in hard-to-reach areas achievable
- Contoured, hand-held foam backing ergonomically designed for better comfort
- Open dot diamond pattern permits debris and swarf to escape, so mineral keeps cutting fast and sharp
|Width||2-1/4 in||57.15 mm|
|Length||3-3/4 in||95.25 mm|
What is the 3M™ Flexible Diamond Hand Lap 6200J?
The 3M™ Flexible Diamond Hand Lap 6200J is a handy tool that helps you achieve a highly polished finish on hard materials like ceramics, stone and carbide.
What size is the hand lap?
The dimensions of the hand lap are 2-1/4 in x 3-3/4 in M20 Mic.
How many pieces come in one case of the product?
Each case comes with ten pieces inside.
Can this be used for both wet and dry grinding?
Yes! This versatile tool works equally well whether used dry or wet according to your needs.
Is it easy to handle during use?
: Absolutely! Its flexible design conforms to intricate shapes and curves so you can maintain consistent contact between abrasive surfaces and sharpening points.
3M™ Flexible Diamond Hand Lap 6200J is ideal for finishing applications that require aggressive sanding, such as highlighting body-in-white automotive defects. The diamond mineral cuts fast and sharp, which minimizes the level of manual pressure needed to get the job done.Comfortable Hand-Held Design
3M™ Flexible Diamond Hand Lap 6200J was ergonomically designed to enhance operator comfort. The contoured foam backing assists with grip, so an even level of pressure may be applied over the surface area. Additionally, because Diamond Hand Lap 6200J is hand-held it can easily get into those stubborn, hard-to-reach areas.Benefits of an Open Dot Pattern
The diamond mineral on 3M™ Flexible Diamond Hand Lap 6200J is adhered to a premium flexible backing in an open dot pattern. The open dot pattern allows swarf to escape, so debris will not clog the mineral. This helps sustain a sharp cut and prolong abrasive service life. The premium flexible backing conforms to the substrate and responds to surface irregularities, so you can finish contoured surfaces. 3M™ Flexible Diamond Hand Lap 6200J comes in a variety of grades tailored to meet specific project needs. Metal bond grades are available in 250, 125, 74, 40, 20 and 10 microns. Bigger microns signal bigger minerals, so these grades are good for heavy, fast stock removal. Smaller grades are best for fine finishing.Overall
3M™ Flexible Diamond Hand Lap 6200J is a versatile tool that can be used for a variety of applications in any workshop. Its comfortable hand-held design and open dot pattern make it easy to use and maintain, while its range of grades ensures that it can be tailored to meet specific project needs.