through rough waters
3M™ Center Water Feed Disc Hand Pad Replacement Sponge 82191, 7/8 in, 10 per inner 100 per case
$1.53 / Each
| SKU | 7000000581 |
|---|---|
| Legacy SKU | 60980015766 |
| UPC | 00051144821914 |
| Part Number | 82191 |
The 3M™ Center Water Feed Disc Hand Pad Replacement Sponge fits 3M Center Water Feed Stikit™ or Hookit™ Hand Pads to keep the work surface damp without significant water run-off while sanding. This pad supplies the proper amount of water for wet sanding of plastics, primer surface, paint, and fiberglass. The water washes the sanding residue off the sanding disc which keeps the disc from loading.
- Use with the 3M center water feed system
- Designed for use with 3-inch x 7/8-inch 3M™ Center Water Feed Disc Hand Pad
- Water prevents disc loading thus providing longer abrasive life and consistent results
- 7/8-inch in diameter to fit disc hand pad
Product Dimensions |
Imperial | Metric |
| Width | 6-1/2 in | 16.51 cm |
|---|---|---|
| Length | 10.38 in | 26.35 cm |
| Diameter | 7/8 in | 22.225 mm |
Shipping Dimensions |
|
| Weight | 0.45 lb |
|---|---|
| Length | 10.375 in |
| Width | 6.5 in |
| Height | 6.875 in |
| Color | Yellow |
|---|
PRODUCT FAQ
-
What is 3M™ Center Water Feed Disc Hand Pad Replacement Sponge 82191 used for?
The 3M™ Center Water Feed Disc Hand Pad Replacement Sponge 82191 is mainly used to replace the existing sponge while operating the center water feed hand pad.
-
How many replacement sponges does a case of 3M™ Center Water Feed Disc Hand Pad Replacement Sponge contain?
Each case of the 3M™ Center Water Feed Disc Hand Pad Replacement Sponge contains a total of hundred (100) replacements, with ten (10) per inner pack.
-
Is this product compatible only with specific types/brands of hand pads or polishes?
Yes, it has been specially designed to work best with certain models and brands. However, you can check specifications and usage directions on the product page at our official website or by asking one of our experts.
-
Can I order smaller quantities than an entire case of these replacement sponges?
: At present, only cases are available for purchase until new options become available in the future.
The 3M™ Center Water Feed Disc Hand Pad Replacement Sponge is an essential part of the 3M™ Center Water Feed System. This system is perfect for use on primers and e-coat on automotive metal. The sponge dispenses water to the 3M Center Water Feed Disc Hand Pad, which keeps the abrasive clean without significant run-off.
The sponge holds water to supply in appropriate amounts to the surface, which flushes swarf from the sanding disc, and keeps the disc from loading. The 3M pad design dispenses precisely the right amount of water for wet sanding of plastics, primer surface, paint, and fiberglass.
Damp Sanding AdvantagesDamp sanding minimizes airborne sanding residue, which is contained and wiped off of the coated surface before it settles into hard-to-reach areas. This reduces potential defects and process time. Residue does not become airborne and cause contamination during subsequent process steps, such as paint application. The water feed also helps keep the abrasive clean, reducing loading and clogging, which extends the life of the abrasive and can help prevent defects from loaded or clogged discs.
3M Science for Better SandingThe 3M™ Center Water Feed System is an example of how 3M applies science to life. These systems of tools, abrasives, and accessories are optimized to work together to help you get your job done right.