The 3M™ Hookit™ Film Disc 360L features an aluminum oxide abrasive grain on a film backing for effective fine sanding on plastics, gel coats and polyurethane solid surface substrates. The sturdy film backing gives the durability needed for a high-production environment, and its excellent resistance to edge tearing provides the life of the disc over discs with standard A-weight paper backings.
- Aluminum oxide abrasive offers a fast cut and long life, and performs well on many surfaces
- Durable film backing is tear-resistant and provides a close-tolerance, consistent finish
- Open coat construction helps reduce loading and provides a more aggressive cut
- 3M™ Hookit™ Disc is easy to change and reuse, maximizing utility for the life of the disc
- Suitable for sanding and finishing on composites, gel coats, fiberglass, and other solid surface materials
|Diameter||6 in||152.4 mm|
|Maximum Speed||10,000 rpm|
What is the diameter and weight of each 3M™ Hookit™ Film Disc 360L, P500?
The disc has a diameter of 6 inches (15.24 cm) and no-hole design for full-face vacuuming.
How many discs are included in each case?
Each case of these discs contain five hundred (500) individual pieces, all individually packed by hundred per inner box.
Can you tell me more about the abrasive mineral composition on this type of disc?
Sure! This variety incorporates aluminum oxide as its primary abrasive mineral which offers excellent initial cut rate combined with superb durability suitable for use with random orbital or rotary sanders.
. Does this pack come with any additional attachment method?
. Yes! These hook-and-loop fastening feature hooks made from flexible fabric that allows fast change-outs using hook-and-loop attachments; therefore, it locks your sheet tightly in place during sanding and can be easily swapped around when grinding multiple surfaces to maintain optimum performance throughout usage.
Product Description: 3M™ Hookit™ Film Disc 360L
The 3M™ Hookit™ Film Disc 360L is a versatile abrasive disc that is ideal for a variety of applications. The film backing provides a close-tolerance, consistent finish, making it a good choice for spot repairs, sanding plastic parts, paint feathering on defects, or sanding automotive primer.
To help reduce loading on the disc, the 3M™ Hookit™ Film Disc 360L is designed with an open coat construction without a load-resistant stearate coating. The disc features a convenient 3M™ Hookit™ hook-and-loop attachment on the backing, which enables easy re-use so the disc can be used again and again for the life of the product. The disc attaches to the low-profile 3M™ Hookit™ Disc Pad (sold separately) on a random orbital sander. The Film Disc 360L comes in a range of grades for various applications from fine sanding to finishing.
Aluminum oxide is the mineral of choice for the 3M™ Hookit™ Film Disc 360L. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges, whereas traditional natural abrasives dull more quickly. Due to its fast cut-rate, hardness, and strength, it is widely used in grinding applications in addition to sanding and finishing applications. Aluminum oxide is suitable for a wide variety of materials in both woodworking and metalworking, including ferrous alloys.
At 3M, we offer a complete line of hook-and-loop style 3M™ Hookit™ discs for workspaces where adhesive-backed discs may become contaminated by dust, dirt, or flying debris. They are often used in applications where a 3M™ Stikit™ disc may be too aggressive, as Hookit™ discs tend to leave finer finishes than adhesive-backed discs. Hookit sanding discs conveniently and firmly attach to a hook-and-loop backup disc pad (sold separately) on a random orbital sander, can be removed cleanly and easily, and can be re-used again and again for the extent of the abrasive life.