3M™ Microfinishing Film Belt 272L, 100 Mic, Type UK, 37 in x 75 in, 5 ea/Case

$128.02 / Each

SKU	7000120324
Legacy SKU	60600148674
UPC	00051115195051
Product Number	272L

3M Microfinishing Film Belt 272L was designed to deliver close tolerance precision finishes on a versatile range of substrates from gelcoat and soft rubber to fiberglass and metals.

Durable 5 mil film backing won’t deflect when run, so it can stand up to contours
Micron graded aluminum oxide mineral cuts sharp but won’t gouge or mar the substrate
Features a closed coat construction for finish consistency
Excellent choice for applications requiring fine finishes
Available in a versatile range of grades, so operators can select the right grade for their application

Add to cart

Immense Durability

Can Be Used In Many Industries

Multi-Functional

Versatile Across Applications

Product Dimensions	Imperial	Metric
Weight	0 NULL
Width	0 null
Length	0 null
Height	0 null

Shipping Dimensions
Weight	13.00066 lb
Length	40.45984 in
Width	8.37992 in
Height	11.76969 in

Color	Black

PRODUCT FAQ

What is the recommended application for the 3M™ Microfinishing Film Belt 272L?

The 3M™ Microfinishing Film Belt 272L is specifically designed for micro-finishing and roll finishing applications.
What are the dimensions of this product?

This product measures 37 inches by 75 inches, with a thickness of100 microns.
How many film belts are included in each case?

Each case includes five (5) micro-finishing film belts.
Is this type UK that has been confirmed by element restrictions, including RoHS compliance?

: Yes! The type UK on our products indicates that it adheres to important environmental regulations like RoHS compliance.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

SKU 7000120324 | 3M™ Microfinishing Film Belt 272L

UPC 00051115195051 | 3M™ Microfinishing Film Belt 272L

Aluminum Oxide Mineral

3M™ Microfinishing Film Belt 272L is a unique abrasive belt designed for sheet polishing, finishing, and flat finishing. The belt is made by anchoring aluminum oxide mineral to a polyester film backing with resin. Aluminum oxide mineral is a popular choice among industrial professionals due to its fast cut rate and long life. The mineral's hardness, strength, and low heat retention help the belt withstand the repeated wear that grinding and finishing often demand.

Water-Resistant Polyester Backing

The polyester film backing on 3M™ Microfinishing Film Belt 272L is water-resistant, allowing the belt to be run wet or dry. By applying a lubricant, like water, as the abrasive runs, operators may be able to wash away swarf and debris that tend to clog the abrasive or warp and discolor the substrate. The resin bond that fastens aluminum oxide to the backing helps the abrasive stay cool, because it breaks down gradually as the belt rotates.

Available in a Range of Grades

3M™ Microfinishing Film Belt 272L is available in a versatile range of grades, from 9 to 100 micron. Operators can select the right grade for their unique application. Higher grades, like 100 micron, are good for higher removal processes, while lower grades, like 9, are good for final, fine finishes. This film-backed belt enables operators to quickly achieve desired Ra (roughness average) and other surface finish parameters. These are some of the reasons why this belt is used across industries, from metalworking to woodworking.

Unique abrasive belt designed for sheet polishing, finishing, and flat finishing
Anchors aluminum oxide mineral to a polyester film backing with resin
Water-resistant polyester film backing allows the belt to be run wet or dry
Available in a versatile range of grades, from 9 to 100 micron
Enables operators to quickly achieve desired Ra (roughness average) and other surface finish parameters
Used across industries, from metalworking to woodworking