3M™ Microfinishing Film Belt 272L, 100 Mic, Type UK, 52 in x 75 in, 5 ea/Case

$166.61 / Each

SKU	7010363727
Legacy SKU	60600148682
UPC	00051115195068
Product Number	272L

3M Microfinishing Film Belt 272L was designed to deliver close tolerance precision finishes on a versatile range of substrates from gelcoat and soft rubber to fiberglass and metals.

Durable 5 mil film backing won’t deflect when run, so it can stand up to contours
Micron graded aluminum oxide mineral cuts sharp but won’t gouge or mar the substrate
Features a closed coat construction for finish consistency
Excellent choice for applications requiring fine finishes
Available in a versatile range of grades, so operators can select the right grade for their application

Add to cart

Immense Durability

Can Be Used In Many Industries

Multi-Functional

Versatile Across Applications

Product Dimensions	Imperial	Metric
Weight	0 NULL
Width	0 null
Length	0 null
Height	0 null

Shipping Dimensions
Weight	18.5 lb
Length	55.31299 in
Width	11.8748 in
Height	8.3748 in

Color	Black

PRODUCT FAQ

What is the size of 3M™ Microfinishing Film Belt 272L, 100 Mic, Type UK?

The size of the belt is 52 in x 75 in.
How many pieces are there in a case of this product?

There are five (5) pieces per case.
What is the micron rating for this product?

The microfinishing film belt has a rating of 100 microns.
Can this film belt be used with any particular type of machine or equipment?

Yes. It works well with most centerless cylindrical grinding machines and backstand belt sanders.
Is there anything else I should know about this product before using it on my materials or components?

This abrasive material provides consistent finishes without cut-rate degradation and run cooler on heat-sensitive alloys.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

SKU 7010363727 | 3M™ Microfinishing Film Belt 272L

UPC 00051115195068 | 3M™ Microfinishing Film Belt 272L

Aluminum Oxide Mineral

3M™ Microfinishing Film Belt 272L is a unique abrasive belt designed for sheet polishing, finishing, and flat finishing. The belt is made by anchoring aluminum oxide mineral to a polyester film backing with resin. Aluminum oxide mineral is a popular choice among industrial professionals due to its fast cut rate and long life. The mineral's hardness, strength, and low heat retention help the belt withstand the repeated wear that grinding and finishing often demand.

Water-Resistant Polyester Backing

The polyester film backing on 3M™ Microfinishing Film Belt 272L is water-resistant, allowing the belt to be run wet or dry. By applying a lubricant, like water, as the abrasive runs, operators may be able to wash away swarf and debris that tend to clog the abrasive or warp and discolor the substrate. The resin bond that fastens aluminum oxide to the backing helps the abrasive stay cool, because it breaks down gradually as the belt rotates.

Available in a Range of Grades

3M™ Microfinishing Film Belt 272L is available in a versatile range of grades, from 9 to 100 micron. Operators can select the right grade for their unique application. Higher grades, like 100 micron, are good for higher removal processes, while lower grades, like 9, are good for final, fine finishes. This film-backed belt enables operators to quickly achieve desired Ra (roughness average) and other surface finish parameters. These are some of the reasons why this belt is used across industries, from metalworking to woodworking.

Summary

3M™ Microfinishing Film Belt 272L is designed for sheet polishing, finishing, and flat finishing.
The belt is made by anchoring aluminum oxide mineral to a polyester film backing with resin.
The polyester film backing is water-resistant, allowing the belt to be run wet or dry.
3M™ Microfinishing Film Belt 272L is available in a versatile range of grades, from 9 to 100 micron.
This film-backed belt enables operators to quickly achieve desired Ra (roughness average) and other surface finish parameters.