Scotch-Brite™ Light Deburring Wheel is a smooth running, convolute-constructed wheel that provides a clean system for light deburring, polishing, and finishing. This wheel is made with Soft construction and smooth operation to require less effort by the operator than a harder wheel.
- Provides a clean and economical system for removing fine burrs, yet resulting in a polished finish
- Conformability offers consistent finishing while keeping fresh abrasive mineral continuously exposed
- Non-woven web runs cool and lessens impact on heat-sensitive materials
- Unique resin system produces less smearing, reducing clean and prep time
- Multi-purpose wheel cleans, finishes, blends, deburrs, and polishes all types of metals, composites and glass
|Diameter||6 in||152.4 mm|
|Maximum Speed||6,000 rpm|
What is the Scotch-Brite™ Light Deburring Wheel mainly used for?
The LD-WL wheel is designed to remove light burrs, blends and finishes on various metals.
How many wheels come in a case of Scotch-Brite™ Light Deburring Wheels?
A case of the LD-WL 6S Fine, 6 in x 2 in x 1 in wheel contains two (2) deburring wheels.
What makes the Scotch-Brite™ Light Deburring Wheel unique compared to other abrasive wheels out there?
Unlike traditional grinding abrasives that tend to gouge material and generate heat which can cause warping and discoloration over time, this light deburring wheel provides a uniform finish without altering dimension or imparting any major color even after prolonged use.
. Can this product be cleaned off easily for reusing it again?
. Absolutely! One great benefit of our equipment is that they are washable and reusable making them very cost effective while performing at maximum efficiency every time you reuse them.
The Scotch-Brite™ Light Deburring Wheel is a specialized product designed for applications that require a moderate degree of conformability and density to maintain critical tolerances while providing a fine polished finish. The wheel is made with a unique resin system that helps minimize smearing and reduces heat build-up, which reduces the risk of part discoloration and warping while extending the life of the wheel.
The Light Deburring Wheel is available in fine grade abrasive, which uses silicon carbide, a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep. While it breaks down faster than aluminum oxide, it produces a superior finish.
Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. This wheel is made with an open-web material that runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.