Scotch-Brite™ Light Deburring Wheel is a smooth running, convolute-constructed wheel that provides a clean system for light deburring, polishing, and finishing. This wheel is made with Soft construction and smooth operation to require less effort by the operator than a harder wheel.
- Provides a clean and economical system for removing fine burrs, yet resulting in a polished finish
- Conformability offers consistent finishing while keeping fresh abrasive mineral continuously exposed
- Non-woven web runs cool and lessens impact on heat-sensitive materials
- Unique resin system produces less smearing, reducing clean and prep time
- Multi-purpose wheel cleans, finishes, blends, deburrs, and polishes all types of metals, composites and glass
|Diameter||8 in||203.2 mm|
|Maximum Speed||4,500 rpm|
What is the Scotch-Brite™ Light Deburring Wheel used for?
The Scotch-Brite™ Light Deburring Wheel is primarily used for light deburring, cleaning and finishing applications on metal surfaces.
What are the dimensions of each wheel in the case?
Each wheel measures 8 inches x 1/2 inch x 3 inches. You will receive a total of 4 wheels per case.
Is this product suitable for use with a bench grinder or a hand-held tool?
Yes! This product can be fitted onto both bench grinders and hand-held tools with ease.
Can I use water or oil as a lubricant when using this deburring wheel?
Absolutely! The LD-WL Fine grade Scotc-Brite wheels are great at running dry without any additional fluids. However, it's perfectly safe to run them with water or oil - depending on your preference and/or application needs.
The Scotch-Brite™ Light Deburring Wheel is a specialized product designed for applications that require a moderate degree of conformability and density to maintain critical tolerances while providing a fine polished finish. The wheel is made with a unique resin system that helps minimize smearing and reduces heat build-up, which reduces the risk of part discoloration and warping while extending the life of the wheel.
The Light Deburring Wheel is available in fine grade abrasive, which uses silicon carbide, a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep. While it breaks down faster than aluminum oxide, it produces a superior finish.
Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. This wheel is made with an open-web material that runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.