3M™ Double Coated Polyethylene Foam Tape 4462 is a black or white, closed-cell, polyethylene foam carrier. It is formulated for more hard to bond surfaces. The unique rubber adhesive system provides quick stick and conforms to irregular and low surface energy (LSE) materials.
- Black or white, 0.031 in. (0.8 mm) closed-cell polyethylene foam carrier
- High ultimate adhesion to a wide variety of surfaces
- Conformable tape bonds to irregular surfaces
- Unique rubber adhesive system provides quick stick
- Adheres well to most low surface energy (LSE) materials
- This product is white
|Width||54 in||1371.6 mm|
|Length||72 yd||65.83 m|
What is 3M™ Double Coated Polyethylene Foam Tape 4462W used for?
3M™ Double Coated Polyethylene Foam Tape 4462W is designed to bond surfaces, seal windows and door frames, as well as other applications where a moderate level of holding power is needed.
Is the tape durable enough to last long-time usage?
Yes! The tape has good aging and UV resistance properties that make it suitable for both indoor and outdoor use. It also withstands high humidity conditions without losing its adhesive strength.
Can this tape be removed without leaving residue on the surface?
Absolutely! The double-coated foam creates a strong hold but can still be easily removed from most substrates without damaging or staining the surface.
How does one apply the foam tape properly?
Before applying, make sure that both surfaces are clean and dry. Peel off one side of the release liner and press firmly onto one surface, then peel off the other side of the release liner while pressing down evenly across all areas of contact between surfaces.
Speed up the mounting process and achieve a more aesthetically pleasing installation with 3M™ Double Coated Polyethylene Foam Tape 4462. This 1/32 in. thick polyethylene foam tape is known for its high ultimate adhesion and reliable performance across many surfaces. One of its noted features is its ability to conform to irregular and low surface energy substrates. It provides high ultimate adhesion to many plastics and is formulated for demanding indoor and general purpose mounting and bonding applications. Common uses include decorative trim, nameplates and other general purpose mounting applications.Recommended Application
- Indoor general purpose mounting and joining
- Decorative trim
- Nameplate mounting
- Point-of-purchase displays and signs
3M double coated tapes offer speed, strength and improved aesthetics to your mounting application. Instead of mechanical fasteners such as screws, bolts and studs, double coated tapes leave no puncture holes. These tapes can be easily applied by hand or with a dispenser, with no special application equipment required for a firm bond.What is Double Coated Tape?
In general, double coated tape is composed of a foam, paper, film, or tissue carrier that is coated on both sides with pressure sensitive adhesive. The adhesive is protected by a peel-away liner that can be removed at the time of application or left in place until the joining surfaces are ready to be attached. Applications for double coated tape are found in construction, fabrication, arts, and hobby. For bonding rough or irregular surfaces, 3M™ Double Coated Foam Tapes fill gaps and distribute stress uniformly over the bonded area.
Brochures, Catalogs & Data Sheets
- Pdf Brochures_3m industrial adhesi