3M™ Double Coated Polyethylene Foam Tape 4462 is a black or white, closed-cell, polyethylene foam carrier. It is formulated for more hard to bond surfaces. The unique rubber adhesive system provides quick stick and conforms to irregular and low surface energy (LSE) materials.
- Black or white, 0.031 in. (0.8 mm) closed-cell polyethylene foam carrier
- High ultimate adhesion to a wide variety of surfaces
- Conformable tape bonds to irregular surfaces
- Unique rubber adhesive system provides quick stick
- Adheres well to most low surface energy (LSE) materials
- This product is white
|Width||0.37 in||9.5 mm|
|Length||72 yd||65.83 m|
What is the 3M™ Double Coated Polyethylene Foam Tape 4462?
The 3M™ Double Coated Polyethylene Foam Tape 4462 is a white foam tape that we manufacture to cater for general-purpose bonding and mounting.
What are the dimensions of the product?
This particular product has a width of 3/8 inch, comes with a roll length of 72 yards, and has a thickness (or mil) rating of 31.
How many rolls come in each case?
Each case contains up to twenty-four (24) rolls of this foam tape.
Is this double-sided or single-sided tape?
It's double-coated foam tape; it means that both sides come covered with adhesive layers capable of bonding strongly on various surfaces such as metal, glass, plastic among others.
Can I use this tape outdoors even when exposed to extreme weather conditions?
Yes! The foam tapes boasts excellent long-term holding power that works uniquely well on unpredictable outdoor environments. Because of its polyethylene structure which resist moisture and weathering effects,potential users could utilize this product effectively across different applications be it industrial or commercial without minding about any potential failure over time.
Speed up the mounting process and achieve a more aesthetically pleasing installation with 3M™ Double Coated Polyethylene Foam Tape 4462. This 1/32 in. thick polyethylene foam tape is known for its high ultimate adhesion and reliable performance across many surfaces. One of its noted features is its ability to conform to irregular and low surface energy substrates. It provides high ultimate adhesion to many plastics and is formulated for demanding indoor and general purpose mounting and bonding applications. Common uses include decorative trim, nameplates and other general purpose mounting applications.Recommended Application
- Indoor general purpose mounting and joining
- Decorative trim
- Nameplate mounting
- Point-of-purchase displays and signs
3M double coated tapes offer speed, strength and improved aesthetics to your mounting application. Instead of mechanical fasteners such as screws, bolts and studs, double coated tapes leave no puncture holes. These tapes can be easily applied by hand or with a dispenser, with no special application equipment required for a firm bond.What is Double Coated Tape?
In general, double coated tape is composed of a foam, paper, film, or tissue carrier that is coated on both sides with pressure sensitive adhesive. The adhesive is protected by a peel-away liner that can be removed at the time of application or left in place until the joining surfaces are ready to be attached. Applications for double coated tape are found in construction, fabrication, arts, and hobby. For bonding rough or irregular surfaces, 3M™ Double Coated Foam Tapes fill gaps and distribute stress uniformly over the bonded area.