The durable Scotch-Brite™ SE Surface Conditioning Belt was built to last, resisting both wear and sharp edges when used for cleaning, blending, deburring and finishing on a variety of metals.
- Tough aggressive non-woven belt offered in a wide range of grades for heavy duty deburring and finishing
- For use on backstand and off hand equipment
- Reinforced backing and non-woven open web material provides superior flexibility for detail work, over contours and edges
- Reduced loading and heat build-up allow extended operating time and consistent surface conditioning results
- Aggressive cutting without gouging, removes surface imperfections, grindlines, mill, and other marks
|Width||3/4 in||19 mm|
|Length||18 in||457 mm|
What is the 3M Scotch-Brite SE Surface Conditioning Belt made of?
The SE Surface Conditioning Belt is made with aluminum oxide abrasive and has a nylon fiber backing.
Would the SE-BS be suitable for cleaning up rust and paint from metal surfaces?
Yes, it would be perfect for that. It's designed to remove surface imperfections without removing base material, like rust and old paint.
Can this belt be used on a portable hand-held tool or does it require a stationary machine?
It can definitely be used on a portable tool. The belt features a quick change attachment system which allows for easy swapping between different tools depending on your needs.
How many belts come in one case of SPR 17816A?
There are 20 belts included per case of SPR 17816A, so you'll have plenty to tackle any job you encounter!
Scotch-Brite™ SE Surface Conditioning Belt is a high-performance abrasive belt that is constructed of resin-reinforced non-woven fiber. This belt is designed to resist loading and avoid under-cutting or gouging of the work piece. It exhibits high initial and extended rates of cut, while maintaining superior edge durability. All belts may be used for "low stretch" applications.
The belt includes a woven fabric (scrim) that is embedded in the nylon structure to provide additional strength and durability for edge work, deburring, and efficient blending of all metal types. The non-woven material combined with abrasive grain is an ideal way to add a great finish or remove burrs. Trust Scotch-Brite™ Belts to deliver fantastic finishes.
Scotch-Brite™ SE Surface Conditioning Belt uses course grade aluminum oxide abrasive. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.
Belt sanders are used for rapid grinding, sanding, and finishing on a variety of surfaces. Depending on the material being worked, sanding wheels and discs may clog, quickly making them less efficient, while belt sanders continue to sand without clogging because small grooves in the abrasive belt open as they go around the arc of the drive wheel.