The durable Scotch-Brite™ SE Surface Conditioning Belt was built to last, resisting both wear and sharp edges when used for cleaning, blending, deburring and finishing on a variety of metals.
- Tough aggressive non-woven belt offered in a wide range of grades for heavy duty deburring and finishing
- For use on backstand and off hand equipment
- Reinforced backing and non-woven open web material provides superior flexibility for detail work, over contours and edges
- Reduced loading and heat build-up allow extended operating time and consistent surface conditioning results
- Aggressive cutting without gouging, removes surface imperfections, grindlines, mill, and other marks
|Width||3 in||76.2 mm|
|Length||20-1/2 in||520.7 mm|
What is the Scotch-Brite™ SE Surface Conditioning Belt made out of?
The Scotch-Brite™ SE Surface Conditioning Belt, SE-BS, A/O Coarse, 3 in x 20-1/2 in, 10 ea/Case is made from a combination of aluminum oxide mineral and non-woven nylon fibers that are designed to deliver consistent cutting action.
Can I use this belt on stainless steel surfaces?
Yes. The Scotch-Brite™ SE Surface Conditioning Belt is ideal for deburring and finishing various types of metals like aluminum and stainless steel.
How durable are these belts? Will they wear out fast with frequent use?
These long-lasting conditioning belts have been designed using hardwearing materials to ensure you'll get great performance every time. Even with frequent or heavy use, you can expect consistent results for an extended period.
Scotch-Brite™ SE Surface Conditioning Belt is a high-performance abrasive belt that is constructed of resin-reinforced non-woven fiber. This belt is designed to resist loading and avoid under-cutting or gouging of the work piece. It exhibits high initial and extended rates of cut, while maintaining superior edge durability. All belts may be used for "low stretch" applications.
The belt includes a woven fabric (scrim) that is embedded in the nylon structure to provide additional strength and durability for edge work, deburring, and efficient blending of all metal types. The non-woven material combined with abrasive grain is an ideal way to add a great finish or remove burrs. Trust Scotch-Brite™ Belts to deliver fantastic finishes.
Scotch-Brite™ SE Surface Conditioning Belt uses course grade aluminum oxide abrasive. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.
Belt sanders are used for rapid grinding, sanding, and finishing on a variety of surfaces. Depending on the material being worked, sanding wheels and discs may clog, quickly making them less efficient, while belt sanders continue to sand without clogging because small grooves in the abrasive belt open as they go around the arc of the drive wheel.