Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
SKU 7100018790
Legacy SKU 60010021602
UPC 00051144888047
Product Number 568XA

3M™ Trizact™ PSA Film Disc Roll 568XA utilizes microreplicated cerium oxide uniformly distributed across a 3-mil film backing to create a high gloss on glass, and solid surfaces. Use 568XA film discs wet. Pressure sensitive adhesive backing in disc roll form makes handling and attachment easy.

  • Microreplicated cerium oxide delivers high gloss, crisp reflection, richer appearance
  • 3M™ Trizact™ abrasives start sharp and stay sharp, resulting in more predictable finishes and improved, consistent results
  • Adhesive-backed discs easily peel off from the roll for quick handling and minimal downtime
  • Use wet for glass defect repair and solid surface finishing
  Add to cart
On it's way to you March 6  


Minimum Order 1 Roll
Order Increment 1 Roll
  High-Quality Surface Finishes
  Reduces Abrasive Costs
  Long Lasting Performance
  Fantastic Price
Product Dimensions
Imperial Metric
Diameter 5 in 127 mm
Shipping Dimensions
Weight 3.58 lb
Length 10.9 in
Width 10.9 in
Height 8.3 in
Color White


  1. Can you tell me more about the 3M Trizact PSA Film Disc Roll 568XA?

    Sure thing! The 3M™ Trizact™ PSA Film Disc Roll 568XA is a collection of high-quality abrasive discs designed to deliver consistent uniform finishes on surfaces.

  2. How many discs come in each roll?

    There are approximately 100 discs per roll of the 5-inch x5/8-inch size, die #500BB.

  3. Is it possible to purchase multiple rolls at once and how are they shipped?

    Yes, definitely! You can order as many rolls as you need by selecting however many cases required. And when purchased from an authorized dealer, this product comes sealed with easy open tear off tab making storage convenient.

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
Finish and Repair Sensitive Surfaces

3M™ Trizact™ PSA Film Disc Roll 568XA is designed with Trizact microreplicated cerium oxide, ensuring a fast, consistent cut rate that easily removes defects such as scuffs, scratches, and acid marks on table glass, airplane windscreens and windows, architectural glass, and other solid surfaces. The film backing is water-resistant and requires little water for touch-up, minimizing mess and processing steps.

Convenient PSA Disc Rolls Minimize Downtime

3M™ Trizact™ PSA Film Disc Roll 568XA provides multiple adhesive-backed discs on a single roll of liner. This makes them easy to peel off one at a time, efficient to store, and economical. The pressure-sensitive adhesive coating on the backs is quick and simple to use – simply press the disc onto the backup pad and you're ready to go. They remove just as cleanly, leaving an uncontaminated surface for the next disc.

About Cerium Oxide

Cerium oxide is an oxide of the rare earth metal, cerium. The average grain size of the particle is measured in nanometers in raw form, making it one of the most effective abrasives for final polishing steps on solid surfaces. It is heat-resistant and effective as a polishing agent for glass mirrors, plate glass, crystal, ophthalmic lenses, precision optics, and precious and semiprecious stones.

Trizact Abrasives

3M™ Trizact™ abrasives are engineered using 3M microreplication — the creation of microscopic 3-dimensional structures applied to a backing in a uniform and precise pattern. These pyramid-like structures contain multiple layers of mineral. When they break down during use, fresh cutting mineral continues to be exposed so results are consistent throughout the life of the abrasive. Ongoing sharp cutting action contributes to higher throughput, more uniform results, and greater productivity.

Polishes and Leaves Glass Crystal Clear

Use 3M™ Trizact™ 568XA discs for a final polish. First, wet the surface slightly with a small amount of water. As you polish, the mineral "pyramids" will break down to form a slurry-like solution. The polishing action that occurs will remove scratches left by previous leveling steps. For acrylic-filled solid surfaces, use 568XA damp as a final step to attain a high-gloss finish. Remove silica coatings (anti-glare and static) and fluoric acid spots in a single step with 568XA.

Brochures, Catalogs & Data Sheets