through rough waters
3M™ Trizact™ PSA Film Disc 568XA, 1-1/4 in x NH, Die 125CK, 200/Bag, 10,000 ea/Case
$1.03 / Each
| SKU | 7100193098 |
|---|---|
| Legacy SKU | 60440318941 |
| UPC | 00638060298275 |
| Product Number | 568XA |
3M Trizact PSA Film Disc 568XA has all the benefits industrial professionals have come to expect from Trizact abrasives, including consistent and sharp cutting action. What makes this abrasive unique is the naturally-occurring mineral that's used: cerium oxide. It helps with glass defect repair and acrylic solid surface finishing by minimizing gouging.
- Designed for defect repair, finishing and polishing
- Natural cerium oxide mineral cuts sharply without gouging substrate
- 3M™ Trizact™ microreplication technology enhances consistent cutting action
- Adhesive backing for swift, easy power tool attachment
- Little water required for optimal results
Product Dimensions |
Imperial | Metric |
| Weight | 1.412 lbs | |
|---|---|---|
| Width | 0 null | |
| Length | 0 null | |
| Height | 0 null | |
| Diameter | 1-1/4 in | 31.75 mm |
| Center Hole Diameter | 0 NP | 0.0 NP |
Shipping Dimensions |
|
| Weight | 71.176 lb |
|---|---|
| Length | 12 in |
| Width | 12 in |
| Height | 7 in |
| Maximum Speed | 10,000 rpm |
|---|
PRODUCT FAQ
-
What is the size specifications of 3M™ Trizact™ PSA Film Disc 568XA, 1-1/4 in x NH, Die 125CK, 200/Bag, 10,000 ea/Case?
The discs are sized at 1-1/4 inches by no hole and designed for use with a die. Each bag contains around approximately 200 discs per case containing about ten thousand pieces.
-
Can you describe the grit type of the disc used for specific applications?
Yes! The product uses an A5 grade aluminum oxide abrasive material that's coated onto a film backing and treated with precision Shaped Ceramic Grain technology to supply consistent performance during its lifespan from long life to reliable finishing ability.
-
Are there any recommended uses or compatibility issues we should consider before ordering this item?
This model universal design allows it compatible with most metals such as stainless steel; carbon steel while producing less heat. Additionally products treated with bonding surfaces like paint and primer can also be polished using this item. It offers extended usage periods even after multiple uses hastening down-time intervention intervals making it highly useful in automotive repairs too!
3M™ Trizact™ PSA Film Disc 568XA is designed to repair defects on sensitive surfaces such as glass, acrylic, and solid surfacing. The abrasive mineral, attached to a PSA backing using microreplication technology, cuts aggressively without significantly scratching or gouging the surface. This results in a high gloss finish, which is often desirable during surface finishing. The film backing is water-resistant and requires minimal water for touch-up, reducing mess and processing steps.
Swift Tool AttachmentThe pressure-sensitive adhesive (PSA) on the back of 3M™ Trizact™ PSA Film Disc 568XA allows for easy attachment to power tools. The PSA backing adheres firmly to a backup pad with light pressure and can be easily peeled off, leaving a clean surface for the next abrasive in the sequence. The thin layer of adhesive between the abrasive and the backup pad allows for direct power transmission to the workpiece surface, resulting in aggressive sanding. Convenient liners reduce contamination of the adhesive, maximizing adherence to the disc pad.
3M™ Science, Applied to Trizact™ Abrasives3M™ Trizact™ abrasives use microreplication technology to reduce processing steps, increase throughput, and create consistency. During microreplication, small three-dimensional structures resembling pyramids are adhered to a backing. These "pyramids" contain layers of mineral that break down after repeated use, exposing fresh mineral and sustaining the abrasive's sharpness. Ongoing sharp cutting action reduces the need to swap out the abrasive, contributing to higher throughput and increased productivity. The mineral is uniformly distributed over the abrasive surface, providing consistent contact for a consistent cut.
- Designed for sensitive surfaces such as glass, acrylic, and solid surfacing
- PSA backing allows for easy attachment to power tools
- Microreplication technology reduces processing steps and increases throughput
- Uniformly distributed mineral provides consistent contact for a consistent cut
