Designed for fine line and critical paint masking, 3M™ Vinyl Tape 471+ is a conformable tape with a semi-translucent backing. This durable tape is flexible and removes cleanly even after bake cycles, without adhesive build-up or ghosting. Use it on flat, curved, or compound surfaces to ensure exceptional paint lines in a variety of painting applications across a broad spectrum of industries.
- Excels in masking applications to create sharp, fine paint lines for striping, color separation and complex designs
- Semi-translucent indigo backing provides some visual see-through for accurate alignment of tape
- Clean removal without ghosting, even after 30 minute bake cycle at temperatures up to 250°F/121°C
- Unique stretch properties enable tape to remain stretched to conform to uneven surfaces without lifting, thus avoiding paint bleed
- Rubber adhesive provides quick stick with excellent holding strength on most surfaces
|Width||0.3 in||6.35 mm|
|Length||36 yd||32.9 m|
|Height||5.3 mil||0.1 mm|
Brochures, Catalogs & Data Sheets
- Pdf Data Sheets_3mtm vinyl tape 47
- Data Sheet
For industrial/occupational use only. Not for consumer sale or use.3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.
3M Vinyl Tape 471+ is a conformable vinyl tape with a versatile rubber adhesive and a moderately translucent backing that allows for accurate masking alignment with simple or complex patterns. This vinyl tape provides clean removal without adhesive residue, even after a 30-minute bake cycle at 250°F (121°C). 3M Vinyl Tape 471+ brings performance and productivity for fine line masking in many critical painting applications. Sharp, clean paint lines for color separation are possible because it resists lifting and its versatile rubber adhesive bonds to a wide variety of surfaces, including resins, then lifts off cleanly from flat or compound surfaces. The tape conforms well to curves and is designed to stretch and hold, even with a radius as tight as 1.5-inches. It follows irregular designs to deliver sharp lines. Its moderate translucence allows for alignment where complex patterns are outlined. Flexible vinyl backing is also abrasion-resistant and will protect adjacent surfaces in most sanding operations. When finished, its one-piece removal preserves the sharp paint lines it helped create. Add to cart