3M™ Cubitron™ II Flap Disc 969F, 60+, T29 Quick Change, 4-1/2 in x 5/8"-11, 10 ea/Case

$9.24 / Each

SKU	7100104606
Legacy SKU	60440306169
UPC	00076308643928
Product Number	969F

3M Cubitron ll Flap Disc 969F is the ideal choice for high-pressure applications like beveling, weld removal and edge deburring. By combining a durable polyester backing with 3M Precision-Shaped Grain, this long-lasting flap disc delivers a consistent, fast cut on a variety of metals while providing a smooth finish.

IDEAL FOR AGGRESSIVE GRINDING APPLICATIONS: Perfect for tasks like beveling, weld removal, and edge deburring.
EXCEPTIONALLY FAST CUT: Built with 3M Precision-Shaped Grain to help increase productivity.
DURABLE POLYESTER BACKING: Stands up to high unit pressure applications.
CONSISTENT CUT RATE: Individual flaps break down, exposing fresh mineral throughout the life of the disc
EASY TO USE: Versatile flap disc offers a lower risk of gouging compared to fiber discs and bonded wheel
IMPORTANT FINISH APPLICATIONS: Ideal for tasks where the quality of the finish is crucial.

Add to cart

Premium Deburring, Grinding and Finishing

For Right Angle Grinders

Long Lasting Performance

Industry Low Price

Product Dimensions	Imperial	Metric
Weight	0.38 lbs
Width	4-1/2 in
Length	4-1/2 in
Height	0.6252 in
Diameter	4-1/2 in	114.3 mm
Center Hole Diameter	0 NP	0.0 NP

Shipping Dimensions
Weight	4.011 lb
Length	7.1248 in
Width	5.25 in
Height	5.6248 in

Color	Maroon
Maximum Speed	13,300 rpm

PRODUCT FAQ

What grit level is the 3M™ Cubitron™ II Flap Disc 969F, 60+, T29 Quick Change, and what can I use it for?

The grit level on our flap disc is rated at 60+. You can use this product to finish welds, remove mill scale or rust and grind edges.
How many pieces of 3M™ Cubitron™ II Flap Disc come in each case?

Each pack comes with a total of ten (10) pieces of the flap discs.
Can you tell me more about the T29 quick change feature included on these discs?

Certainly! The T29 designation allows for quick and easy changing of these discs as it features a raised center hub that locks onto your cutting tool. This means you don't have to fuss around with screwing your disc into place; just snap the new one in and start sanding.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

SKU 7100104606 | 3M™ Cubitron™ II Flap Disc 969F

UPC 00076308643928 | 3M™ Cubitron™ II Flap Disc 969F

Product Number 969F | 3M™ Cubitron™ II Flap Disc 969F

Keeps Cutting After Other Discs Quit

3M™ Cubitron™ II Flap Disc 969F – powered by 3M Precision-Shaped grain and a tough polyester backing – is the highest-performing 3M flap disc for demanding applications like heavy grinding, edge deburring and beveling. It also features a grinding aid that helps it run cool to maintain cutting efficiency on heat-sensitive metals. All of these attributes make 3M™ Cubitron™ II Flap Disc 969F a good match for projects that require an equally durable and versatile abrasive disc.

Flap Disc Design

Flap discs are the ideal choice for a wide range of applications on a variety of metals. The abrasive flaps offer a long-lasting supply of fresh abrasives in a load-resistant design. Designed for use with a right-angle grinder, flap discs allow you to breeze through a wide range of applications with less chance of gouging – even for less-experienced grinders.

Powered by 3M Precision-Shaped Grain

3M™ Cubitron™ II Flap Disc 969F features proprietary 3M Precision-Shaped Grain – a grain design that continually fractures into sharp points that slice cleanly through metal, unlike traditional abrasives which tend to plow through the substrate. The grains fracture evenly and continuously to expose new sharp edges to keep the disc cutting efficiently. The result is that 3M™ Cubitron™ II products out-cut and outlast conventional ceramic industrial abrasives.

Applications