through rough waters
3M™ Cubitron™ II Flap Disc 969F, 40+, T29, 4-1/2 in x 7/8 in, 10 ea/Case
$7.10 / Each
| SKU | 7100104907 |
|---|---|
| Legacy SKU | 60440306185 |
| UPC | 00076308643942 |
| Product Number | 969F |
3M Cubitron ll Flap Disc 969F is the ideal choice for medium to high-pressure applications like beveling, weld removal and edge deburring. By combining a durable polyester backing with 3M Precision-Shaped Grain, this long-lasting flap disc delivers a consistent, fast cut on a variety of metals while providing a smooth finish.
- Ideal 3M flap disc for aggressive grinding applications like beveling, weld removal and edge deburring
- Built with 3M Precision-Shaped Grain for an exceptionally fast cut, helping increase productivity
- Durable polyester backing material stands up to high unit pressure applications
- Individual flaps break down, exposing fresh mineral to deliver consistent cut rate for the life of the disc
- Versatile flap disc is easy to use with a lower risk of gouging than fiber discs and bonded wheels
- Great for applications where finish is important
Product Dimensions |
Imperial | Metric |
| Weight | 0.239 lbs | |
|---|---|---|
| Width | 4-1/2 in | |
| Length | 4-1/2 in | |
| Height | 0.6252 in | |
| Diameter | 4-1/2 in | 114.3 mm |
| Center Hole Diameter | 7/8 in | 22.225 mm |
Shipping Dimensions |
|
| Weight | 2.60145 lb |
|---|---|
| Length | 7.08661 in |
| Width | 5.23622 in |
| Height | 5.59055 in |
| Color | Maroon |
|---|---|
| Maximum Speed | 13,300 rpm |
PRODUCT FAQ
-
What is the grit size of the 3M™ Cubitron™ II Flap Disc 969F, 40+, T29, 4-1/2 in x 7/8 in?
The grit size of the disc is 40+.
-
How many discs are included in a single case of the product?
There are a total of ten (10) discs included in each case.
-
Can this flap disc be used on both ferrous and non-ferrous metals?
Yes, it can be used on both ferrous and non-ferrous metals.
-
What is the backing material for this flap disc?
This flap disc has a fiber backing material that offers durability and reinforced strength.
-
. Is it possible to adjust speeds while using Cubitron™ II Flap Disc during grinding or sanding operations?
. Most certainly! Our high-quality discs perform up to our customers' expectations across varied applications at all speeds from low to high; offering optimal results with less downtime.
3M™ Cubitron™ II Flap Disc 969F – powered by 3M Precision-Shaped grain and a tough polyester backing – is the highest-performing 3M flap disc for demanding applications like heavy grinding, edge deburring and beveling. It also features a grinding aid that helps it run cool to maintain cutting efficiency on heat-sensitive metals. All of these attributes make 3M™ Cubitron™ II Flap Disc 969F a good match for projects that require an equally durable and versatile abrasive disc.
Flap Disc DesignFlap discs are the ideal choice for a wide range of applications on a variety of metals. The abrasive flaps offer a long-lasting supply of fresh abrasives in a load-resistant design. Designed for use with a right-angle grinder, flap discs allow you to breeze through a wide range of applications with less chance of gouging – even for less-experienced grinders.
Powered by 3M Precision-Shaped Grain3M™ Cubitron™ II Flap Disc 969F features proprietary 3M Precision-Shaped Grain – a grain design that continually fractures into sharp points that slice cleanly through metal, unlike traditional abrasives which tend to plow through the substrate. The grains fracture evenly and continuously to expose new sharp edges to keep the disc cutting efficiently. The result is that 3M™ Cubitron™ II products out-cut and outlast conventional ceramic industrial abrasives.
Applications- Beveling
- Edge deburring
- Aggressive weld removal
