A smooth ride
through rough waters
through rough waters
Welcome Guest
3M™ Disc Sander 28408, 4 in - 5 in x 5/8 in-11 EXT 1 hp, 1 ea/Case
$752.25 / Each
| SKU | 7100142460 |
|---|---|
| Legacy SKU | 60440243511 |
| UPC | 00051141284088 |
| Part Number | 28408 |
The 3M™ Disc Sanders are lightweight and rugged, designed with a high power-to-weight ratio to help you get more work done in less time – and with less strain. 3M™ Gripping Material and a 97-degree angle head allow more comfort and control. Great for grinding, blending, weld leveling, metal prep and other metal fabrication applications.
- High power-to-weight ratio helps operators get more work done in less time
- 3M™ Gripping Material allows easy control and user comfort
- Ergonomic 97-degree head allows for more comfortable wrist position
- Dual mount feature allows direct mount for visibility or collet mount for extended reach
Product Dimensions |
Imperial | Metric |
| Width | 7.44 in | 18.9 cm |
|---|---|---|
| Length | 12-1/2 in | 31.75 cm |
| Height | 4.63 in | 11.75 cm |
| Diameter | 4-1/2 in | 114.3 mm |
Shipping Dimensions |
|
| Weight | 3.57 lb |
|---|---|
| Length | 12.5 in |
| Width | 7.438 in |
| Height | 4.625 in |
| Thread Size | 5/8-11 EXT |
|---|---|
| Maximum Speed | 12,000 rpm |
- Pdf Instructions_3mtm sander 4 5 1
For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. 
Comfort and Versatility
3M™ Disc Sanders have a lightweight, compact design and a 97-degree head that allows for greater wrist comfort and control. They also include a comfortable, full coverage grip that absorbs vibration and moderates cold temperatures caused by air flow.
3M™ Gripping Material, provided on the hand grip area of the disc sanders, has a two-fold effect. First, it makes grip more secure. Second, it allows a more effortless grip, which over time can help reduce fatigue. Whether in wet or dry conditions, it provides a grip you can rely on.
The 1 HP disc sander features a removable and repositionable side handle to accommodate right- or left-handed use, allowing the operator to run the tool comfortably from any angle.
3M™ Quick Attach Systems for Deburring, Grinding, Blending, Finishing and Cleaning
For quick-change convenience and a selection of discs and accessories that can be fine-tuned for any application, you can't beat the system of 3M™ Roloc™ Discs and Backup Pads. Each disc sander provides a dual mount feature which allows direct mounting of a Roloc™ backup pad on the tool, without the typical collet assembly found on other tools. This direct mount feature provides easier control, lower tool profile, and reduced runout/vibration – all characteristics which enhance the user experience. Alternatively, use the collet mount for extended reach or for applications which require a 1/4 inch arbor/collet interface.
The Right Tools to Get the Job Done
In 2- and 3-inch size models with 0.3 –1.0 HP, and maximum operating speeds from 12,000–20,000 RPM, one of the 3M™ Disc Sanders is sure to be the right one to get the job done. A complete system of professional grade tools, accessories and abrasives are designed specifically to help you tackle today's tough metalworking challenges and help you do your job right.
For optimal safety, operators should always read and follow manual safety instructions and ensure the tool's operating speed does not exceed the maximum RPM imprinted on the tool. Add to cart
3M™ Disc Sanders have a lightweight, compact design and a 97-degree head that allows for greater wrist comfort and control. They also include a comfortable, full coverage grip that absorbs vibration and moderates cold temperatures caused by air flow.
3M™ Gripping Material, provided on the hand grip area of the disc sanders, has a two-fold effect. First, it makes grip more secure. Second, it allows a more effortless grip, which over time can help reduce fatigue. Whether in wet or dry conditions, it provides a grip you can rely on.
The 1 HP disc sander features a removable and repositionable side handle to accommodate right- or left-handed use, allowing the operator to run the tool comfortably from any angle.
3M™ Quick Attach Systems for Deburring, Grinding, Blending, Finishing and Cleaning
For quick-change convenience and a selection of discs and accessories that can be fine-tuned for any application, you can't beat the system of 3M™ Roloc™ Discs and Backup Pads. Each disc sander provides a dual mount feature which allows direct mounting of a Roloc™ backup pad on the tool, without the typical collet assembly found on other tools. This direct mount feature provides easier control, lower tool profile, and reduced runout/vibration – all characteristics which enhance the user experience. Alternatively, use the collet mount for extended reach or for applications which require a 1/4 inch arbor/collet interface.
The Right Tools to Get the Job Done
In 2- and 3-inch size models with 0.3 –1.0 HP, and maximum operating speeds from 12,000–20,000 RPM, one of the 3M™ Disc Sanders is sure to be the right one to get the job done. A complete system of professional grade tools, accessories and abrasives are designed specifically to help you tackle today's tough metalworking challenges and help you do your job right.
For optimal safety, operators should always read and follow manual safety instructions and ensure the tool's operating speed does not exceed the maximum RPM imprinted on the tool. Add to cart