3M™ Hookit™ Microfinishing Film Disc 366L, 60 Mic, Type D, 11 in x NH, Die 1100F, 50/Carton, 100 ea/Case, PKG WI-04-101500

$5.24 / Each

SKU	7100227734
Legacy SKU	60440403354
UPC	00638060774472
Product Number	366L

Precision, micron-graded, resin-bonded, polyester film backing. Aggressive cut with uniform finish. Load-resistant coating provides greater efficiency and longer product life. Use on plastic, fiberglass, wood, metal, solid-surface composites.

Aluminum oxide abrasive offers a fast cut, long life, and professional performance on many surfaces
Durable polyester film backing enables close-tolerances and consistent finish
Hookit™ hook and loop backing allows quick attachment and removal for multi-step finishing processes
Load-resistant coating prevents dust and debris from clogging the disc

Add to cart

High-Quality Surface Finishes

Reduces Abrasive Costs

Long Lasting Performance

Fantastic Price

Product Dimensions	Imperial	Metric
Weight	3.023 lbs
Width	12-1/2 in
Length	12-1/2 in
Height	2.6 in
Diameter	11 in	279.4 mm
Center Hole Diameter	0 NP	0.0 NP

Shipping Dimensions
Weight	6.578 lb
Length	12.9 in
Width	13 in
Height	5.6 in

Maximum Speed	2,000 rpm

PRODUCT FAQ

What is the difference between a Hookit™ Microfinishing Film Disc and other types of abrasive discs?

The biggest advantage of 3M™ Hookit™ Microfinishing Film Discs is that they use hook-and-loop attachment, which makes them much easier to remove and replace than traditional adhesive-backed discs. With no wasted time cleaning adhesive residue off of your backing pad, you can get more work done in less time.
Can I use these microfilm finishing discs on any type of material?

These Type D Microfinishing Film Discs are specifically designed for smoothing out hard paint finishes, clear coats, as well as plastic parts and sheet metals. That said, it’s always best to test out different products on a small area before using them widely.
Are there any special storage requirements for this product?

If stored properly in a dry environment between 60°-80°F (16-27°C) with the original packaging sealed until ready-to-use date may last up to two years from date manufactured.
How long does each disc typically last?

The longevity will depend heavily upon many factors including what level grit being used (i.e. lighter grits tend to saturate faster), type/condition/or configuration of machine being used as well project/application being performed.
Generally speaking under normal working conditions we expect each individual disk lasts approximately five minutes or longer if taken care properly.

For industrial/occupational use only. Not for consumer sale or use.

3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

SKU 7100227734 | 3M™ Hookit™ Microfinishing Film Disc 366L

Product Description: 3M™ Hookit™ Microfinishing Film Disc 366L

The 3M™ Hookit™ Microfinishing Film Disc 366L is a high-quality abrasive disc designed for precision finishing applications. With a 60 Mic grit size and Type D attachment, this disc is perfect for achieving a smooth and consistent finish on a variety of surfaces. Measuring 11 inches in diameter and featuring a non-hole design (NH), it offers excellent durability and long-lasting performance.

One of the key features of the 3M™ Hookit™ Microfinishing Film Disc 366L is its unique die 1100F construction. This construction ensures that the disc maintains its shape and integrity even under high pressure and heat, making it ideal for demanding sanding and finishing tasks. Each carton contains 50 discs, providing ample supply for your projects.

The 3M™ Hookit™ Microfinishing Film Disc 366L is part of the 3M™ Hookit™ system, which allows for quick and easy disc changes. The hook-and-loop attachment system ensures a secure and reliable connection between the disc and the sanding tool, minimizing downtime and maximizing productivity. With its exceptional performance and ease of use, this disc is a must-have for professionals in the automotive, woodworking, and metalworking industries.

Key Features: