Slip Stream 24/7 – Global Supply and Distribution Company providing 3M Industrial, Commercial & Safety Solutions
English Spanish
SKU 7100228300
Legacy SKU 61500334372
UPC 00638060774021
Product Number CF-RL

Scotch-Brite Clean and Finish Roll delivers consistent results for finishing, blending, polishing, and cleaning on a variety of metals, wood, plastics surfaces as well as hard-to-reach areas. The roll stock can be easily cut to any length. Clean and Finish roll stock provides consistent surface conditioning for the life of the product.

  • Cut-to-fit roll stock provides uniform finishing, blending, polishing, contour finishing, and cleaning
  • Conformable pad gets into hard-to-reach areas
  • Suitable for hand use or on oscillating and dual pad rubbing machines
  • Open web material resists loading, allowing abrasives to maintain a consistent cut-rate
  • Suitable for metal, wood, composite and advanced materials
  Add to cart
On it's way to you April 22  

Qty

Minimum Order 1 Roll
Order Increment 1 Roll
  Multi-Functional
  Global Shipping
  Fantastic Price
  Best Price Match Guarantee
Product Dimensions
Imperial Metric
Width 48 in 1219.2 mm
Length 20 ft 6.096 m
Shipping Dimensions
Weight 12.939 lb
Length 50.2 in
Width 13.4 in
Height 13.4 in

PRODUCT FAQ

  1. What type of material is the Scotch-Brite™ Clean and Finish Roll made of?

    The Clean and Finish Roll is made from an aluminum oxide abrasive material.

  2. What surfaces can I use this clean and finish roll on?

    You can use this roll for a variety of surfaces, including metal, wood, plastics, ceramics, porcelain and glass.

  3. Is it easy to tear off pieces from the 48-inch roll as needed?

    Yes! You can easily cut the Scotch-Brite™ Clean and Finish Roll into smaller sections with scissors or any cutting tool that you have available.

  4. How many rolls are in one case?

    One case comes with a single roll of CF-RL T7 A/O Very Fine measuring 48 in x 20 ft.

For industrial/occupational use only. Not for consumer sale or use.
3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

Scotch-Brite™ Clean and Finish Rolls are a versatile abrasive product that can be used for a variety of applications. These rolls are available with three different abrasive minerals: silicon carbide, aluminum oxide, or talc.

Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep and finishing. Aluminum oxide is a hard, blocky mineral that provides high cut-rate and long life. While silicon carbide breaks down faster than aluminum oxide, it produces a finer finish. Talc is a mild abrasive that can be used to achieve a satin finish or with polish to create a high gloss finish in topcoat rubbing applications.

Scotch-Brite™ abrasives are unique surface conditioning products with abrasives incorporated into non-woven fiber matrix. Combining abrasives and non-woven material creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.

The general purpose pad can be cut and used by hand for precise control. Wider width stock can be cut and paired with a hand pad holder for uniform finishing, or on an inline or oscillating sander to cover larger areas. The load resistance keeps the abrasive particles exposed to maintain a consistent cut rate.

  • Available with silicon carbide, aluminum oxide, or talc abrasive mineral
  • Combines abrasives and non-woven material for consistent results
  • Open-web material runs cool and is load resistant
  • Can be cut and used by hand or with a holder for uniform finishing
Brochures, Catalogs & Data Sheets
Other Products in this Family

Lead times are estimates and may vary based on our suppliers' product availability.